Airtac HLSL Precision Slide Table Cylinder HLSL16X125SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X125SBS is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X125SBS
The HLSL16X125SBS is a symmetrical cross-roller slide-table cylinder with a 16 mm bore and 125 mm stroke. The cross-roller guide integrates with the dual-rod air cylinder for precise straight-line travel with high rigidity and low deflection. The floating joint prevents side torque from loading the rods. This model fits a shock absorber on the extension side to cushion end-of-stroke impact on the forward motion.
This is a genuine AirTAC part. The magnet is standard for position sensing using CMSH, DMSH, or EMSH switches in the body's magnetic-switch slots. We verify thrust, dimensions, and allowable load and moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X125SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X125SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 gives higher thrust than smaller bores in the HLS series, suitable when a long 125 mm stroke must carry a workpiece with minimal deflection. The HLSL symmetrical body suits mirrored or center-mounted installations. The BS adjuster places a shock absorber on the extension side only; choose B for both ends or BF for retraction side. Thread is PT. Allowable load, moment, and deflection curves are published in the datasheet - route sizing to us for confirmation.
Applications
Forward-Stroke Pick-and-Place
Cross-roller precision over 125 mm stroke with extension-side shock absorption for pick-and-place heads where the forward end-of-stroke needs soft cushioning.
Symmetrical Transfer Slide
The symmetrical body mounts on either side for parts transfer between stations where mirror-image installation is required.
Workpiece Stage Positioning
Positions a workpiece platform along an assembly stage with rigid dual-rod thrust and cross-roller straightness across the full 125 mm stroke.
FAQ
How does BS differ from BF on the HLSL16X125SBS?
BS places the shock absorber on the extension side only, cushioning the forward end-of-stroke. BF would place it on the retraction side, and B would fit absorbers on both ends. Bore 6 does not support any shock-absorber option.
How fast can the HLSL16X125SBS cycle, and what pressure limits apply?
Speed range is 50-500 mm/s with meter-out speed control. Operating pressure for bore 16 is 0.15-0.7 MPa (22-100 psi), and maximum working pressure is 0.7 MPa (100 psi). Never exceed 0.7 MPa.