Airtac HLSL Precision Slide Table Cylinder HLSL16X30SBS

The HLSL16X30SBS is a symmetrical slide-table cylinder: a double-acting, dual-rod air cylinder with an integrated cross-roller guide that keeps the table travelling straight under load. At bore 16 and 30 mm stroke it delivers moderate thrust, doubled by the two rods, while the cross-roller guide gives high precision and rigidity with low deflection. The symmetrical HLSL body lets you mount the workpiece on either side, and the floating joint means the rods take no side torque from the connected load. The BS suffix adds a shock absorber on the extension side for controlled deceleration at stroke end.

This is a genuine AirTAC part with a position-detecting magnet fitted as standard; magnetic-switch slots on the body accept CMSH, DMSH or EMSH sensor switches. Operating pressure for bore 16 is 0.15-0.7 MPa (22-100 psi), with 0.7 MPa as the maximum working pressure. Exact thrust, dimensions and allowable load and moment figures for this stroke are shown in the on-page specification table, and we will confirm them from the datasheet on request.

Bore 16 gives moderate push; step up to bore 20 or 25 for higher thrust, or down to 8 or 12 for lighter loads. Choose the HLSL cross-roller slide table when precision, rigidity and low deflection matter most; choose HLQ if you need an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide with the best straightness, or HLF where a low-height body is required. Confirm that 30 mm sits within the bore 16 stroke table and that your load and moment ratings fall inside the published tables and curves - we can size that with you. This version carries the BS adjuster (shock absorber, extension side); A adds rubber stoppers both ends, B both ends, and blank is the basic version. Thread is PT; G and NPT options exist in the series.