Airtac HLSL Precision Slide Table Cylinder HLSL16X40SBF
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL16X40SBF Precision Slide Rail Cylinder Specifications
- Model: HLSL16X40SBF
- Type: Double-acting slide rail cylinder
- Bore size: Ø16mm
- Stroke: 40mm (standard), customizable up to 500mm
- Structure: Twin-shaft integrated guide rail
- Operating pressure: 0.1-0.9 MPa
- Cushioning: Adjustable elastic buffer + shock absorber pad
- Repeat positioning accuracy: ±0.02mm
- Max speed: 500mm/s
- Temperature range: -10℃ to 80℃
- Lubrication: Pre-lubed (VG68 oil), maintenance-free for 2000km travel
- Mounting: Horizontal/vertical with 4x M4 threaded holes
- Material: Aluminum alloy body, hardened steel guide shafts (HRC60+)
- Port size: M5x0.8 (standard), NPT1/8 optional
- Weight: 780g ±2% (without accessories)
- Dimensions: 160mm(L) × 48mm(W) × 32mm(H)
High-rigidity linear actuator combining pneumatic power with precision guide rails, featuring zero-backlash dual linear ball bearings. The anodized surface treatment provides corrosion resistance for Class 8 cleanroom environments. Integrated magnetic slot enables position feedback sensor installation (sensor not included).
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Precision lens positioning in optical equipment
- Laboratory sample transfer mechanisms
- Medical device component alignment
Installation note:
Apply 2Nm torque limit during mounting. Requires 5-10μm filtered air supply.
For vertical mounting exceeding 500mm/s speed, external shock absorbers recommended.
Relubrication interval: Every 500km travel or 6 months in normal conditions.
Critical alignment:
Maintain <0.1mm/m parallel tolerance between cylinder axis and load center.
Misalignment beyond spec may reduce bearing life by 70%.
| Property | Property Value |
|---|---|
| sku | HLSL16X40SBF |
| External Stop Block Type | Retract End Hydraulic Cushion |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | <40mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.