Airtac HLSL Precision Slide Table Cylinder HLSL16X50SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X50SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X50SA
The HLSL16X50SA is a symmetrical double-acting dual-rod slide-table cylinder integrating an air cylinder with a cross-roller linear guide. The cross-roller guide provides high precision and rigidity with low deflection, while the dual-rod design doubles the thrust. A floating joint ensures the rods take no side torque for smooth, straight travel at this 16 mm bore and 50 mm stroke.
This is a genuine AirTAC part with a standard magnet for position sensing, compatible with CMSH, DMSH, and EMSH sensor switches. We confirm exact thrust, dimensions, and allowable load-moment values from the manufacturer datasheet or on-page spec table upon request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X50SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 16 mm bore when your application needs moderate to higher thrust without specifying exact force here. The cross-roller guide is ideal for high-rigidity tasks, and the symmetrical HLSL body suits center-mounted loads. This model includes adjustable rubber stoppers on both ends for fine stroke tuning, with PT threading. We can route load and moment sizing to the published tables and curves to confirm fit for your setup.
Applications
Assembly Stage
Positions small components accurately during multi-step assembly using the rigid cross-roller guide.
Small-Parts Transfer
Moves lightweight items between conveyor lines with precise straight-line travel and bumper cushioning.
Gripper Traverse
Slides a gripper horizontally to pick and place parts without deflecting under side loads.
FAQ
What is the difference between the A and AF adjuster codes on this slide table?
The A code means adjustable rubber stoppers are installed on both ends of the cylinder, while AF specifies the stopper on the retraction side only. This model uses the A code for both ends.
What is the maximum operating pressure for the HLSL16X50SA?
The maximum working pressure is 0.7 MPa. The operating range for a 16 mm bore is 0.15 to 0.7 MPa. Meter-out speed control should keep travel between 50 and 500 mm/s.