Airtac HLSL Precision Slide Table Cylinder HLSL16X75SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X75SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X75SA
The HLSL16X75SA is a symmetrical cross-roller guided slide-table cylinder from AirTAC featuring adjustable rubber stoppers at both ends for fine end-of-stroke positioning control. The integrated cross-roller linear guide provides high rigidity and minimal deflection, while the dual-rod double-acting design doubles thrust and the floating joint protects the rod from side torque. With a 16 mm bore and 75 mm stroke, this model delivers moderate thrust and generous travel for precision guided motion.
This is a genuine AirTAC part fitted with a standard magnet for position detection. CMSH, DMSH, and EMSH sensor switches install into the magnetic-switch slots machined into the body. We verify all thrust, dimensional, and load-moment specifications against the AirTAC datasheet or on-page spec table upon request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X75SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 16 mm bore provides moderate thrust for the HLSL cross-roller family; step up to 20 or 25 mm bore for higher push force or down to 6, 8, or 12 mm for lighter loads. The cross-roller guide is ideal when rigidity and precision are the priority. The A adjuster adds adjustable rubber stoppers at both extension and retraction ends, letting you tune the stopping position and soften impact. Stroke 75 mm is within the valid range for this bore. Thread is PT. For allowable load, moment, and kinetic-energy limits we refer you to the published tables and deflection curves.
Applications
Gripper Traverse Stage
Moves a parallel gripper across a 75 mm stroke for precise part gripping and release in an automated assembly cell.
Symmetrical Transfer Slide
Uses the symmetrical body for balanced centerline mounting to transfer small components between two opposing stations.
Adjustable-Stop Assembly
Fine-tunes end positions with rubber stoppers at both ends for an assembly press that needs controlled, repeatable travel limits.
FAQ
What does the A adjuster code mean on this HLSL model?
The A suffix indicates adjustable rubber stoppers are fitted at both the extension and retraction ends. This lets you fine-tune the stopping position and cushion the impact at each end of the 75 mm stroke without adding external shock absorbers.
Can I exceed 0.7 MPa operating pressure on the 16 mm bore?
No. Maximum working pressure is 0.7 MPa (100 psi). The operating range for the 16 mm bore is 0.15-0.7 MPa (22-100 psi). Proof pressure of 1.2 MPa is for factory validation only and must never be used in service.