Airtac HLSL Precision Slide Table Cylinder HLSL16X75SAF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X75SAF is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X75SAF
The HLSL16X75SAF is a symmetrical cross-roller guided slide-table cylinder from AirTAC equipped with an adjustable rubber stopper on the retraction side only. The cross-roller linear guide delivers superior rigidity and minimal deflection, while the dual-rod double-acting air cylinder doubles thrust and the floating joint isolates the rod from side torque. A 16 mm bore with a 75 mm stroke provides moderate thrust and ample guided travel for precision positioning tasks.
This is a genuine AirTAC part with a standard magnet fitted for position sensing. CMSH, DMSH, and EMSH series sensor switches mount into the body's magnetic-switch slots. We confirm thrust, dimensions, and allowable load-moment figures from the AirTAC datasheet or on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X75SAF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X75SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 16 mm bore offers moderate thrust within the HLSL cross-roller range; choose bore 20 or 25 for higher push force or 6, 8, or 12 for lighter loads. The cross-roller guide suits applications demanding maximum rigidity and precision. The AF adjuster provides an adjustable rubber stopper on the retraction end only, ideal when you need fine-tuned stopping control on the return stroke but a standard bumper suffices at full extension. Stroke 75 mm fits this bore's table. Thread is PT. We route allowable load, moment, and kinetic-energy sizing to you from the published tables and curves.
Applications
Retraction-Indexed Pick
Picks a component on the forward stroke and retracts to a precisely tuned rubber stopper position for repeatable camera inspection.
Return-Stop Assembly Stage
Indexes an assembly fixture forward then retracts to a controlled rubber-stopper position for consistent loading of the next workpiece.
Guided Ejector Slide
Ejects a finished part with cross-roller straightness and returns to an adjustable retraction stop ready for the next cycle.
FAQ
What is the difference between adjuster A and AF on HLSL slide tables?
Adjuster A places adjustable rubber stoppers at both extension and retraction ends. Adjuster AF places the adjustable rubber stopper on the retraction side only, leaving the extension end with the standard bumper cushion. AF suits applications where only the return-stroke position needs fine tuning.
How is allowable load and moment confirmed for this model?
Allowable load, moment, and kinetic-energy limits are published as tables and deflection curves in the AirTAC datasheet. We confirm the exact values for your HLSL16X75SAF application from those published tables on request rather than estimating.