Airtac HLSL Precision Slide Table Cylinder HLSL16X75SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X75SBS is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X75SBS
The HLSL16X75SBS is a symmetrical cross-roller slide table cylinder: an AirTAC air cylinder of bore 16 mm and stroke 75 mm built on an integrated linear guide. Two opposing pistons drive the table, roughly doubling the thrust of a single-rod cylinder of this bore while keeping the slide on a straight path, and the built-in floating joint keeps side torque off the rods. The cross-roller guide carries the load with high rigidity and low deflection, which suits precise small-parts handling and assembly positioning where the table must not wander under load.
This is a genuine AirTAC part ordered under the full factory code. The magnet is standard on the whole series, so position sensing with CMSH, DMSH or EMSH switches in the body slots needs no special build. The BS code fits a shock absorber on the extension side, complementing the standard bumper cushions. Thrust, dimensions and the load and moment limits are published in the datasheet and in the spec table on this page; we will confirm any of them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X75SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X75SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 gives light to moderate push for a slide table; if you need more, step up to bore 20 or 25 in the same series, both running from the same 0.15-0.7 MPa supply. The 75 mm stroke sits within the bore's published stroke table. For guide type, HLS/HLSL cross-roller tables give the highest rigidity and load capacity, HLQ ball-bearing tables add anti-rust, dust-proof travel, HLH miniature roller-ball units give the best straightness, and HLF offers a low-height cross-roller body. This code carries the extension-side shock absorber; A, B, AS, AF and BF end-adjustment codes are also available on HLS/HLQ. Thread is PT as standard, with G and NPT options. Send us your load and moment figures and we will size the model against the published tables and deflection curves.
Applications
Assembly stage positioning
A 75 mm cross-roller slide carries small parts to a screwdriver or press station, holding position with low deflection through every cycle.
Gripper traverse
Move a compact gripper between two part nests; the dual-rod guided table resists the twist a cantilevered gripper would put on a plain cylinder rod.
Pick-and-place indexing
Short, repeatable pick-and-place moves of small components, with the floating joint and guided table keeping the part level at each stop.
FAQ
What does the BS in HLSL16X75SBS mean?
The S after the stroke marks the standard-built magnet; BS is the end-adjustment code for a shock absorber fitted on the extension side. B alone means shock absorbers on both ends and A codes give adjustable rubber stoppers. These adjuster codes exist only on the HLS/HLQ slide tables.
What air supply and speed limits apply?
Use filtered air (40 um or better) at 0.15-0.7 MPa (22-100 psi) for this bore, never above the 0.7 MPa working maximum. Apply meter-out control to keep travel within the 50-500 mm/s band, and confirm load and moment against the datasheet before mounting a cantilevered workpiece.