Airtac HLSL Precision Slide Table Cylinder HLSL20X100SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL20X100SBS is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL20X100SBS
The AirTAC HLSL20X100SBS is a symmetrical cross-roller slide-table cylinder integrating an air cylinder with a high-precision linear guide. The dual-rod, double-acting design doubles thrust while a floating joint protects the rods from side torque. Its cross-roller guide ensures maximum rigidity and precision for the 20 mm bore and 100 mm stroke.
This genuine AirTAC part comes with a standard magnet for use with CMSH, DMSH, or EMSH sensor switches. We can confirm specific thrust, dimensions, and allowable load-moment values from the datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL20X100SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL20X100SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
This 20 mm bore model provides higher thrust for demanding applications. The HLSL cross-roller guide offers the highest precision and rigidity in the HL series. The 100 mm stroke is within the valid range for this bore. The BS adjuster specifies shock absorbers on the extension side for smooth end-of-stroke deceleration. Ports are 1/8" with standard PT threads. Route load and moment sizing to us for verified table values.
Applications
Precision Feeding
Advances parts into a machining station with high repeatability, relying on the rigid cross-roller guide to prevent deflection.
Linear Escapement
Performs a controlled 100 mm linear push to separate and position items accurately on an assembly track.
Adjustable Stopper
Acts as a high-precision adjustable stopper for moving pallets, utilizing the shock absorber on the extension side for soft stopping.
FAQ
What is the difference between the BS and BF adjuster codes?
The BS code specifies shock absorbers on the extension side, while BF places them on the retraction side. Bore 6 does not support B-type adjusters.
How do I mount sensor switches on this cylinder?
The magnet is standard, and magnetic switch slots are built into the body. You can use CMSH, DMSH, or EMSH series switches for position detection.