Airtac HLSL Precision Slide Table Cylinder HLSL20X10S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL20X10S is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL20X10S
The AirTAC HLSL20X10S is a symmetrical cross-roller slide-table cylinder integrating a pneumatic cylinder with a precision linear guide. The dual-rod, double-acting design doubles thrust and a floating joint spares the rods from side torque. The cross-roller guide provides exceptional rigidity and precision for the 20 mm bore and 10 mm stroke.
As a genuine AirTAC part, it includes a standard magnet for position sensing with CMSH, DMSH, or EMSH switches. We can confirm thrust, dimensions, and allowable load-moment from the datasheet or on-page spec table upon request.
Airtac HLSL Precision Slide Table Cylinder HLSL20X10S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL20X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choosing the 20 mm bore offers higher thrust for heavier duty cycles. The HLSL symmetrical cross-roller guide provides the highest precision and load capacity. The short 10 mm stroke is ideal for compact movements. This model uses a basic bumper cushion without additional adjusters. Ports are 1/8" with standard PT threads. We can assist with load-moment sizing using published tables.
Applications
Stopper Module
Uses the short 10 mm stroke to act as a precise stopper for parts on an assembly line, relying on the rigid cross-roller guide.
Clamping Action
Provides a compact, high-rigidity clamping motion for small parts during a machining or inspection process.
Short Transfer
Moves a workpiece a short 10 mm distance between stations with high repeatability and minimal deflection.
FAQ
Does this model include shock absorbers or adjustable stoppers?
No, the HLSL20X10S has a basic bumper cushion. Adjuster options like A or B types can be selected by adding the corresponding suffix if needed for your application.
What is the maximum operating pressure for this 20 mm bore cylinder?
The maximum working pressure is 0.7 MPa. The operating pressure range for the 20 mm bore is 0.15 to 0.7 MPa (22 to 100 psi).