Airtac HLSL Precision Slide Table Cylinder HLSL20X150SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL20X150SA is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL20X150SA
The HLSL20X150SA is a symmetrical, double-acting dual-rod slide table cylinder with an integrated cross-roller linear guide. On a 20 mm bore with 150 mm stroke, the table travels straight with the high rigidity and low deflection the cross-roller guide is known for; the dual rods deliver higher thrust for the bore, and the floating joint prevents side torque from reaching the rods. The SA suffix adds adjustable rubber stoppers on both ends, letting you tune the end-of-stroke cushioning to the table and workpiece mass.
A genuine AirTAC part, it carries the position-magnet as standard, with magnetic-switch slots accepting CMSH, DMSH and EMSH sensor switches. The verified thrust, dimensions and allowable load/moment figures for this model are shown in the on-page specification table or the AirTAC datasheet; we confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL20X150SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL20X150SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 produces moderate-to-higher thrust - increase the bore for heavier duties or reduce it for lighter ones within the HLSL range. HLSL suits applications where cross-roller precision and rigidity matter; choose HLQ for anti-rust, dust-proof ball-bearing guidance, HLH for a miniature roller-ball guide, or HLF for a low-height cross-roller body. Check that the 150 mm stroke appears in the bore 20 stroke table, and take load and moment ratings from the published tables and curves.
The A code here means adjustable rubber stoppers fitted at both ends; if your stop forces are higher, step up to the B version with shock absorbers both ends, or use the single-side AS/BS (extension) and AF/BF (retraction) variants. This model has PT port threads; G and NPT threads are available to order.
Applications
Pick-and-place
A rigid cross-roller guided table carries gripped parts between positions, with adjustable rubber stoppers tuning the stop at both ends of the 150 mm travel.
Gripper traverse
Move a compact gripper across an assembly cell; the symmetrical dual-rod body handles off-center gripper loads while the floating joint protects the rods.
Stopper and eject station
Use the straight, low-deflection slide to push parts against a fixture or stop; end-position stoppers let you match the deceleration to the part weight.
FAQ
What does the A at the end of HLSL20X150SA mean?
The A code designates adjustable rubber stoppers fitted at both ends, which soften and tune the table's stop at each end of stroke. Alternatives on this 20 mm bore are the basic version (no code), B for shock absorbers both ends, AS/BS for the extension side only, and AF/BF for the retraction side only. The S before the adjuster simply confirms the magnet is fitted as standard.
How do I confirm the allowable load for my workpiece?
Allowable load, moment and deflection for the HLSL series are published by AirTAC as tables and curves in the datasheet rather than a single figure, so the correct value depends on the load's position and direction on the table. Send us your workpiece layout and we will confirm the ratings from the datasheet, together with the exact thrust and dimensions for this model.