Airtac HLSL Precision Slide Table Cylinder HLSL20X30S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL20X30S is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL20X30S
The HLSL20X30S is a symmetrical cross-roller slide table cylinder: an AirTAC dual-rod, double-acting cylinder with an integrated cross-roller guide that keeps the table travelling straight under load. The symmetrical body makes it easy to mount and to position workpieces from either side, and the 20 mm bore with 30 mm stroke suits compact stations that need precise, low-deflection guided travel with moderate-to-higher push. Because the rods are supported by the guide, the table takes no side torque - a floating joint at the workpiece spares the rods and seals from bending moments.
This is a genuine AirTAC part with a position-detecting magnet fitted as standard; the body carries slots for magnetic switches CMSH, DMSH or EMSH. Air supply should be filtered to 40 um, with an operating range of 0.15-0.7 MPa (22-100 psi) and speeds of 50-500 mm/s. We are happy to confirm exact thrust, overall dimensions and load/moment ratings from the datasheet or the on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL20X30S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL20X30S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the bore by the push you need: within the HLSL cross-roller family, a 20 mm bore delivers clearly more thrust than the 6, 8 or 12 mm sizes at the same pressure, so it suits stations carrying meaningful payloads. Select this symmetrical L version over the standard HLS when you want mounting flexibility from both sides of the body; the guide type (cross-roller vs ball-bearing, low-height or miniature roller-ball) should follow your precision and envelope needs. Keep the 30 mm stroke within the published stroke table for bore 20.
This basic S-code has no end adjuster; HLSL bore 20 can also be ordered with adjustable rubber stoppers (A/AS/AF) or shock absorbers (B/BS/BF) if you need cushion tuning. Thread here is PT; G and NPT variants exist. For allowable load, moment and kinetic-energy sizing, contact us - these are published as tables and curves in the datasheet.
Applications
Pick-and-place gantry
The guided dual-rod table carries a vacuum or gripper end-effector on a short 30 mm Z or transfer axis, with the cross-roller guide resisting side torque from offset loads.
Small-parts transfer slide
Shuttles machined or moulded parts between fixtures on a precise, straight 30 mm stroke, with the symmetrical body simplifying bracket mounting from either side.
Assembly press-fit stage
Positions and presses small components in assembly fixtures where low deflection of the cross-roller guide keeps parts square during insertion.
FAQ
What does the HLSL20X30S code mean and why choose this cross-roller version?
HLSL is the symmetrical cross-roller slide table: bore 20 mm, stroke 30 mm, S denotes the fitted magnet (standard on the whole line), no adjuster letter means basic cushion bumpers, and no thread letter means PT ports. Cross-roller guidance gives high rigidity and low deflection for precise straight travel, and the symmetrical L body can be mounted and loaded from either side. The on-page table lists the exact thrust for this bore and stroke.
What supply pressure and speed should I run it at?
Operate at 0.15-0.7 MPa (22-100 psi) - 0.7 MPa is the maximum working pressure, so never exceed it. Use air filtered to 40 um and meter-out control to keep speed within the 50-500 mm/s range. Allowable load and moment ratings are confirmed from the datasheet tables and curves; ask us and we will send the verified figures for this model.