Airtac HLSL Precision Slide Table Cylinder HLSL20X75SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL20X75SBS is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL20X75SBS
The HLSL20X75SBS is a symmetrical cross-roller slide table cylinder: a double-acting dual-rod air cylinder with an integrated cross-roller guide, so the moving table travels straight under load with low deflection. With a 20 mm bore and 75 mm stroke it delivers moderate thrust - the dual rods double the push - while the floating joint spares the rods from side torque and keeps the workpiece plate aligned. The symmetrical body makes center-of-load layout easier on mirrored stations.
This is a genuine AirTAC part with the magnet fitted as standard, so CMSH, DMSH or EMSH sensor switches can be read from the magnetic-switch slots on the body. The body mounts three ways and the workpiece mounts two ways. We confirm exact thrust, dimensions and load-moment ratings from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL20X75SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL20X75SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Pick the 20 mm bore when moderate thrust is enough; bigger bores in the HLSL line push harder. The cross-roller guide is the choice for precision and rigidity, where HLQ ball-bearing versions trade some rigidity for anti-rust, dust-proof running and HLH/HLF cover miniature and low-height needs. 75 mm sits within the bore 20 stroke table. The BS suffix fits a shock absorber on the extension side; other options are adjustable rubber stoppers or absorbers on one or both ends. The blank thread position is PT, with G and T available. Send us your load and moment figures and we size them against the published tables and deflection curves.
Applications
Pick-and-place
The cross-roller table carries a gripper or vacuum plate over the 75 mm stroke with straight, low-deflection travel for repeatable placement.
Assembly stage
Use the guided table as a press or insert stage where the dual-rod push and the floating joint keep the tool square to the part.
Small-parts transfer
Shuttle trays or fixtures between stations; magnet slots let CMSH or DMSH switches flag end positions.
FAQ
What does the BS at the end of HLSL20X75SBS mean?
S is the standard magnet fit and BS decodes to a shock absorber fitted on the extension side. Related options are A (adjustable rubber stoppers both ends), B (absorbers both ends), and the single-side codes AS, AF and BF; the blank thread position here is PT.
What air supply does this slide table need?
Air filtered to 40 um at 0.15-0.7 MPa (22-100 psi) for the 20 mm bore, proof pressure 1.2 MPa (175 psi), temperature -20 to 70 C and speed 50-500 mm/s with meter-out control. Never exceed 0.7 MPa working pressure.