Airtac HLSL Precision Slide Table Cylinder HLSL25X100SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X100SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X100SA
The HLSL25X100SA is a symmetrical cross-roller slide table cylinder: a double-acting dual-rod air cylinder with an integrated cross-roller guide, so the table travels straight with low deflection even under off-center loads. The 25 mm bore across a 100 mm stroke gives higher thrust than smaller bores in the line, the dual rods double that push, and the floating joint spares the rods from side torque. The A suffix adds adjustable rubber stoppers at both ends for tuning end-of-stroke damping.
This is a genuine AirTAC part with the magnet fitted as standard, read by CMSH, DMSH or EMSH switches in the magnetic-switch slots on the body. The body mounts three ways and the workpiece two ways. We confirm exact thrust, dimensions and load-moment ratings from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X100SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X100SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore is for higher push within the HLSL range; step down a bore for lighter duty. The cross-roller guide is the precision and rigidity choice, HLQ ball-bearing versions suit anti-rust, dust-proof environments, and HLH/HLF serve miniature and low-height needs. 100 mm is within the bore 25 stroke table. Here the A suffix fits adjustable rubber stoppers at both ends; single-side codes AS/AF and shock-absorber options B/BS/BF are available on the same series. The blank thread position is PT, with G and T available. Send us your load and moment figures and we size them against the published tables and curves.
Applications
Assembly press stage
Adjustable rubber stoppers at both ends let you tune end-of-stroke behavior for light pressing or inserting tasks.
Stopper station
Use the guided table as a stopper or reject slide on conveyor lines, with the cross-roller guide keeping the blade square.
Small-parts transfer
Shuttle small parts between two stations over 100 mm; EMSH or DMSH switches in the body slots confirm each end.
FAQ
How does the A version of the HLSL25X100S differ from the basic model?
Only the cushion option changes: A fits adjustable rubber stoppers at both ends, while the basic HLSL25X100S has the standard bumper. Bore 25 also accepts single-side codes AS/AF and shock-absorber options B/BS/BF on the same series.
How fast can I run this slide table and at what pressure?
Speed is 50-500 mm/s, best controlled meter-out, on air filtered to 40 um. Working pressure for the 25 mm bore is 0.15-0.7 MPa (22-100 psi); proof pressure is 1.2 MPa (175 psi), but never exceed 0.7 MPa in service.