Airtac HLSL Precision Slide Table Cylinder HLSL25X100SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X100SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X100SBF
The HLSL25X100SBF is a symmetrical cross-roller slide table cylinder: an AirTAC air cylinder integrated with a cross-roller linear guide so the table travels straight under load. With a 25mm bore and 100mm stroke, the double-acting dual-rod design gives the higher thrust of the largest HLS bore while the twin rods keep the table square, and the built-in floating joint spares the rod from side torque. The symmetrical HLSL body allows mounting and piping from either side, and the cross-roller guide delivers high rigidity and low deflection for precise guided travel.
This is a genuine AirTAC part with the position magnet fitted as standard, so it is ready for CMSH, DMSH or EMSH magnetic switches in the slots on the body. It runs on air filtered to 40 um at a maximum working pressure of 0.7 MPa. Exact thrust, dimensions and allowable load and moment values for this bore and stroke are shown in the on-page specification table and datasheet - we will confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X100SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X100SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 25 when you need the most push in the HLS series - thrust rises with bore size, and the dual rods double it at the same pressure. HLS cross-roller tables are the choice for maximum precision and rigidity; pick HLQ for an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide, or HLF where body height must stay low. The 100mm stroke sits within the bore 25 stroke table, the BF suffix adds shock absorbers on the retraction side (rubber stoppers and shock absorbers can be selected on either or both ends), and ports are 1/8" with PT, G or NPT thread options. Allowable load and moment are published as tables and curves - send us your load case and we will size it with you.
Applications
Gripper traverse
Carries a gripper across a 100mm stroke in a handling cell, with the cross-roller guide keeping the jaws aligned pick after pick.
Assembly stage
Positions sub-assemblies under a driver or light press with low deflection, thanks to the rigid cross-roller guide and floating joint.
Small-parts transfer
Steps trays or blisters along an assembly line with straight, repeatable table motion at controlled speeds from 50 to 500 mm/s.
FAQ
What does the BF suffix on HLSL25X100SBF mean?
On HLS and HLSL tables the letter after S selects the cushion option: blank is basic, A adds adjustable rubber stoppers on both ends, B adds shock absorbers on both ends, AS/BS cover the extension side and AF/BF the retraction side. Here BF means shock absorbers are fitted on the retraction side only.
What pressure and speed can I run this cylinder at?
Operating pressure for the 25mm bore is 0.15-0.7 MPa (22-100 psi) - 0.7 MPa is the absolute maximum working pressure. Speed is controlled between 50 and 500 mm/s, typically set with a meter-out flow control on the exhaust side.