Airtac HLSL Precision Slide Table Cylinder HLSL25X10S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X10S is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X10S
The HLSL25X10S is a symmetrical cross-roller slide table cylinder: an AirTAC double-acting dual-rod cylinder integrated with a cross-roller linear guide so the table travels in a straight line. The 25mm bore delivers the highest thrust in the HLS family in a short 10mm stroke, making it ideal for clamp, press and eject moves; the dual rods double the push and keep the table square, while the built-in floating joint prevents side torque from reaching the rods. The symmetrical HLSL body allows mounting and piping from either side, with the cross-roller guide giving high rigidity and low deflection.
This is a genuine AirTAC part with the position magnet fitted as standard, so CMSH, DMSH or EMSH magnetic switches can be clipped into the body slots for end-of-stroke sensing. It runs on air filtered to 40 um at a maximum working pressure of 0.7 MPa. Exact thrust, dimensions and allowable load and moment values for this bore and stroke are in the on-page specification table and datasheet - we will confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X10S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
For a short, powerful slide, bore 25 with a 10mm stroke gives the most push in the HLS series - the dual rods double the thrust at the same pressure, and no Newton guessing is needed because the exact figure for this model is in the on-page table. HLS cross-roller tables are chosen for top precision and rigidity; step to HLQ for an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide, or HLF where installation height is tight. This version is basic cushion with no add-on adjuster (A and B types are available across the HLSL range), and the 1/8" ports take PT as standard with G and NPT options. Allowable load and moment come from the published tables and curves - send us your load case and we will check the fit.
Applications
Micro-dosing slide
Drives a dispensing nozzle into position over a 10mm stroke, with the cross-roller guide keeping the tip trajectory straight.
Fine adjustment stage
Nudges fixtures or parts into final position on an assembly machine, using the short stroke for fast, repeatable corrective moves.
Pin ejection
Ejects small formed parts from a nest with the full thrust of the 25mm dual-rod table concentrated into a 10mm move.
FAQ
Does HLSL25X10S need a separate magnet or switch kit for position sensing?
No. Every AirTAC HLS and HLSL slide table, including this one, comes with the position magnet fitted as standard. Simply order a CMSH, DMSH or EMSH magnetic switch and clip it into the slots on the cylinder body - no disassembly or optional magnet is required.
What pressure should I set for this short-stroke table?
The 25mm bore operates from 0.15 to 0.7 MPa (22-100 psi), and 0.7 MPa is the maximum working pressure - do not exceed it even for short, high-force moves. Speed is set between 50 and 500 mm/s with a flow control, typically metered out on the exhaust side for stable table motion.