Airtac HLSL Precision Slide Table Cylinder HLSL25X10SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X10SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X10SA
The HLSL25X10SA is a symmetrical cross-roller slide table cylinder that pairs a 25 mm bore, 10 mm stroke dual-rod air cylinder with an integrated cross-roller guide, so the table travels straight and resists deflection under load. The symmetrical body gives you mounting faces on more than one side, the dual rods double the available push for a bore of this size, and the floating joint in the drive keeps side torque off the rods. The A suffix adds adjustable rubber stoppers at both ends of the travel for end-of-stroke control.
This is a genuine AirTAC part with a position-detecting magnet fitted as standard, and the body carries slots for CMSH, DMSH or EMSH magnetic switches. The exact thrust, dimensions and allowable load and moment figures for this bore and stroke are in the on-page spec table and datasheet - confirm them with us at any time before ordering.
Airtac HLSL Precision Slide Table Cylinder HLSL25X10SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
At 25 mm bore this is one of the higher-thrust sizes in the HLSL line, so choose it when a smaller bore cannot give you enough push - thrust rises with bore area, and the exact figure is in the spec table. The cross-roller guide suits work where precision and rigidity matter more than cost; pick the symmetrical HLSL body when you want mounting flexibility, the HLQ ball-bearing version for anti-rust, dust-proof duty, or the HLF body where height is tight. Check that the 10 mm stroke sits within the published stroke table for bore 25.
The A adjuster here means adjustable rubber stoppers on both the extension and retraction ends; if you only need one side controlled, AS or AF variants are available. The blank thread code gives PT ports; specify G or T for G or NPT instead, and route load and moment sizing to us - those are published as tables and curves.
Applications
Precision assembly stage
The cross-roller guide and symmetrical body hold a small assembly fixture on a short, straight 10 mm press or insert stroke, with rubber stoppers defining both ends.
Gripper traverse
Carries a small gripper between two part positions on a short slide; the dual-rod push suits a 25 mm bore and the floating joint protects the rods from side load.
Small-parts transfer slide
Moves components between nest and outlet on a compact transfer station, guided straight by the cross-roller table with end stoppers on both ends of travel.
FAQ
What does the A in HLSL25X10SA mean?
It is the adjuster code: A means adjustable rubber stoppers are fitted at both the extension and retraction ends of the stroke. If you need a stopper on only one side, choose the AS (extension side) or AF (retraction side) variant instead; shock-absorber B-type codes are also offered in this series for bore 25.
What pressure can I run the HLSL25X10SA at?
For bore 25 the working pressure range is 0.15-0.7 MPa (22-100 psi), and 0.7 MPa is the maximum working pressure - do not exceed it. Proof pressure is 1.2 MPa and speed should be kept between 50 and 500 mm/s, typically set meter-out. Air must be filtered to 40 um.