Airtac HLSL Precision Slide Table Cylinder HLSL25X10SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X10SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X10SBS
The HLSL25X10SBS is a symmetrical cross-roller slide table cylinder: double-acting and dual-rod, with the linear guide built into the body so the table moves in a straight, rigid line with low deflection. The paired rods double the thrust available at a given pressure, and the floating joint prevents side torque from reaching the rods. A 25mm bore and 10mm stroke suit short, forceful, precisely guided moves in compact automation.
This genuine AirTAC cylinder is magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH switches. The BS adjuster code fits a shock absorber on the extension side only, absorbing the table as it strikes the end of its outbound stroke. Thrust, dimensions and allowable load or moment figures come from the datasheet or the on-page specification table; we provide them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X10SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X10SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bigger bore means more push: the 25mm size gives higher thrust than the 6, 8, 12, 16 and 20mm HLSL bores. Stay with the cross-roller HLSL guide for the best precision and rigidity; switch to ball-bearing HLQL only if anti-rust, dust-proof travel is the dominant requirement.
Check that the 10mm stroke is listed in the bore 25 stroke table. BS gives a shock absorber on the extension side; BF cushions retraction only, and B covers both ends. The blank thread on this version is PT, with G and NPT alternatives in the range. Route your load, moment and kinetic-energy questions to us so sizing is checked against the published tables and curves.
Applications
Clamp-and-extend fixture
The table extends 10mm to clamp or position a part against a hard stop, with the extension-side shock absorber absorbing the strike.
Micro assembly press
A short, high-rigidity cross-roller slide presses pins or bearings into place over 10mm, keeping the tool face square to the workpiece.
Tray index step
Mounted under or beside a tray conveyor, the dual-rod table nudges trays or carriers one fixed increment per cycle.
FAQ
Is the magnet in HLSL25X10SBS an optional extra?
No. Every cylinder in this line, including the HLSL25X10SBS, is magnet-fitted as standard; the S in the model code reflects that. The magnet works with AirTAC CMSH, DMSH or EMSH sensor switches seated in the magnetic-switch slots on the body, so position detection needs no additional cylinder option.
How fast can the table run, and at what pressure?
Speed range is 50 to 500 mm/s, typically metered out for controlled table motion. Working pressure for this 25mm bore is 0.15 to 0.7 MPa (22-100 psi) with a 0.7 MPa maximum; proof pressure is 1.2 MPa but is not a working figure. Confirm allowable load and moment against the datasheet tables for your mounting orientation.