Airtac HLSL Precision Slide Table Cylinder HLSL25X125SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X125SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X125SA
The HLSL25X125SA is a symmetrical cross-roller slide table cylinder with a 25 mm bore and a 125 mm stroke. The integrated cross-roller guide holds the table on a straight, rigid path with low deflection, and the symmetrical body gives balanced mounting from either side. Dual rods double the thrust of a single-rod equivalent, and the floating joint shields the rods from side torque applied by the workpiece.
The A suffix adds adjustable rubber stoppers at both ends, letting you fine-tune the end-of-stroke positions. This genuine AirTAC unit carries a positioning magnet as standard for CMSH, DMSH or EMSH switches in the body slots, and we confirm thrust, dimensions and load or moment data from the on-page table or datasheet on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X125SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X125SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Pick bore 25 when the load needs more push than a 20 mm bore can offer; lighter duties can step down a size. The 125 mm stroke appears in the standard bore 25 stroke table, and other listed strokes order identically. This SA version suits lines where end positions must be trimmed after installation, since the rubber stoppers adjust at both ends. Ports are 1/8 inch PT as coded, with G and T threads available. For allowable load, moment and deflection sizing, share the application with us - these values are published as tables and curves and we will confirm the right choice.
Applications
Gripper traverse
Traverse a two-finger gripper between pick and place stations; the adjustable rubber stoppers let you set exact grip positions at each end of the 125 mm stroke.
Tray and magazine indexing
Advance trays or part magazines into a workstation with the cross-roller table keeping the motion square, then stop cleanly on the tuned end positions.
Small assembly fixture feed
Feed components into a fixture or press nest, with the dual-rod thrust carrying the tool and the floating joint protecting the rods from fixture misalignment.
FAQ
What does the A suffix on HLSL25X125SA mean?
It stands for adjustable rubber stoppers fitted at both ends of the stroke, so you can trim the end-of-travel positions to suit the tooling. The basic HLSL25X125S without a letter uses standard bumpers only. Note that shock absorbers use the B suffix codes instead, and the S in the code is simply the standard built-in magnet.
Can I run this cylinder on full line pressure?
Only up to the limit. The 25 mm bore operating range is 0.15 to 0.7 MPa (22-100 psi), and 0.7 MPa is the maximum working pressure. Use clean, dry air filtered to 40 um, keep the table speed within 50-500 mm/s by metering the exhaust, and treat the published load and moment tables as the sizing limit for the tooling you mount.