Airtac HLSL Precision Slide Table Cylinder HLSL25X125SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X125SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X125SBF
The HLSL25X125SBF is a symmetrical cross-roller slide table cylinder: a double-acting dual-rod air cylinder integrated with a cross-roller linear guide so the moving table travels straight with low deflection. The two rods give higher thrust than a single rod of the same bore, while the floating joint isolates the rods from side torque. With a 25mm bore and 125mm stroke it handles longer, heavier precision moves, and the symmetrical body mounts identically from either side.
This is a genuine AirTAC part; the magnet is fitted as standard, so CMSH, DMSH or EMSH switch models click into the body slots for sensing. Code BF fits a shock absorber on the retraction side in addition to the bumpers, and the port thread is PT. We confirm exact thrust, dimensions and load/moment ratings from the datasheet or the on-page table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X125SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X125SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 is the strongest option in the HLS bore range, so select it when the move needs the most push - the verified 0.5 MPa thrust for this model is in the on-page spec table. Stay with HLS/HLSL cross-roller for precision and rigidity; choose HLQ for anti-rust, dust-proof ball-bearing service, HLH for miniature straightness, or HLF for reduced height. Stroke 125 is within the bore-25 published stroke table; confirm load and moment from the published tables or ask us. This version is adjuster code BF (shock absorber, retraction side) with a PT port thread.
Applications
Vertical pick-and-place
The dual rods double the push for downward moves, and the retraction-side shock absorber cushions the return stroke of a vertical pick cycle.
Dosing traverse
Straight cross-roller travel positions a dispense nozzle or probe over the target, with the decelerated retract protecting fluid lines from jerk.
Parts orientation
Used as a precise stopper or flip station, the slide retracts smoothly against the retraction-side shock absorber while holding part alignment.
FAQ
What does the BF suffix on HLSL25X125SBF mean?
BF means a shock absorber is fitted on the retraction side only (F for the retracted, or 'from' side). B alone would mean both ends, BS the extension side only, and A-type codes the adjustable rubber stopper equivalents. Shock-absorber codes are not offered on bore 6.
How fast can I run this slide, and how is speed controlled?
The working speed range is 50-500 mm/s. Meter-out control is recommended for stable table motion, and the retraction-side shock absorber on this model smooths deceleration at the retracted end within that speed range.