Airtac HLSL Precision Slide Table Cylinder HLSL25X150SAF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X150SAF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X150SAF
The HLSL25X150SAF is a symmetrical cross-roller slide table from AirTAC: a double-acting, dual-rod cylinder with an integrated cross-roller guide that keeps the table travelling straight under load. At bore 25 with a 150 mm stroke it delivers the higher thrust available in this bore range, and the symmetrical body gives you two faces for fixture mounting. A built-in floating joint means the rods take no side torque from the attached tooling. The AF suffix adds an adjustable rubber stopper on the retraction side, so you can tune the end-of-stroke cushioning on that side.
This is a genuine AirTAC part with the magnet fitted as standard, so CMSH, DMSH or EMSH switches can be seated in the body slots for position feedback. Thrust figures, overall dimensions and allowable load and moment data are shown in the on-page specification table and datasheet; we are happy to confirm any of them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X150SAF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X150SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Within the HLS family, bore 25 gives you the highest available thrust, so choose it when a 16 or 20 bore feels marginal for the job. The cross-roller guide is the pick where precision, rigidity and low deflection matter, and the symmetrical HLSL body simplifies fixture design around the table. The 150 mm stroke must match the bore 25 stroke table. The adjuster suffix sets end-of-stroke handling: SAF is an adjustable rubber stopper on the retraction side, AS covers the extension side, and B fits shock absorbers on both ends; blank is the basic version. Port thread here is PT, with G and NPT variants available. Size allowable load, moment and kinetic energy from the published tables and curves, or ask us to confirm.
Applications
Assembly stage traverse
Position screws, pins or sensor heads over a fixture using the straight, low-deflection travel of the cross-roller guide.
Gripper traverse
Shuttle a small gripper between pick and place positions; the floating joint keeps side torque off the rods.
Stopper station
Use the retraction-side adjustable rubber stopper to set a repeatable stop point for parts on a transfer line.
FAQ
What does the SAF suffix on HLSL25X150SAF mean?
SAF decodes as a bore 25 symmetrical HLS slide table with a 150 mm stroke, magnet fitted as standard, and an adjustable rubber stopper on the retraction side only. If you need the same tuning on the extension side, choose the AS suffix instead; for shock absorbers on both ends, choose the B suffix.
What pressure and speed can this slide table run at?
The maximum working pressure is 0.7 MPa, and for bore 25 the operating range is 0.15-0.7 MPa (22-100 psi), with air filtered to 40 um and a temperature range of -20 to 70 C. Run speed between 50 and 500 mm/s, typically controlled with meter-out flow. Allowable load and moment must be confirmed from the datasheet tables and curves.