Airtac HLSL Precision Slide Table Cylinder HLSL25X20SAF
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL25X20SAF Precision Slide Table Cylinder Specifications
- Model: HLSL25X20SAF
- Type: Double-axis guided precision cylinder with magnetic sensor slot
- Bore size: 25mm
- Stroke: 20mm (±0.5mm tolerance)
- Operating pressure: 0.1–0.8 MPa
- Max thrust: 130N (at 0.6MPa)
- Repeat positioning accuracy: ±0.01mm
- Sliding resistance: ≤2N
- Weight: 1.25kg (excluding accessories)
- Dimensions: 170mm(L) × 45mm(W) × 56mm(H)
- Material: Aluminum alloy body, stainless steel guide rods
- Seal material: NBR with special low-friction coating
- Sensor type compatibility: D-A93 series magnetic sensors
- Port size: Dual M5x0.8 (P1/P2 ports)
- Temperature range: -20℃ to 80℃
- Protection rating: IP54 (standard), IP67 with optional wipers
- Lubrication: Pre-lubricated (Grease-free operation)
- Mounting: Through-hole pattern (4x M4 threaded holes)
Ultra-precision guided cylinder featuring dual chrome-plated linear shafts and recirculating ball bearings for exceptional straightness (≤0.05mm/m) and minimal deflection. The HLSL25X20SAF integrates T-slot sensor grooves compatible with multiple position feedback systems, making it ideal for closed-loop control applications. Its anodized surface treatment enhances wear resistance in high-cycle operations.
- Precision alignment in semiconductor wafer handling
- Optical component positioning systems
- Automated test equipment probe positioning
- Pharmaceutical blister pack sealing mechanisms
- 3D printer Z-axis micro-adjustments
Installation note:
Maintain 0.02mm/m alignment tolerance during mounting. Use torque-controlled tightening (1.2N·m max)
on guide rod nuts to prevent shaft deformation. For vertical installations, specify optional air
bleeding kit (ACC-HLSL-VK1) to prevent piston drift.
| Property | Property Value |
|---|---|
| sku | HLSL25X20SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <25 mm> |
| Stroke | <20mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.