Airtac HLSL Precision Slide Table Cylinder HLSL25X30SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X30SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X30SBS
The HLSL25X30SBS is the symmetrical version of AirTAC's HLS cross-roller slide table: a double-acting, dual-rod cylinder with an integrated cross-roller guide that keeps the table travelling straight under load. With a 25 mm bore and 30 mm stroke it delivers higher thrust than the smaller bores in the series, and the dual-rod arrangement doubles the push while the built-in floating joint spares the rods from side torque. The cross-roller guide gives the highest precision and rigidity in the HL family, with low deflection for accurate positioning.
This is a genuine AirTAC part with a position-magnet fitted as standard, so magnetic switches CMSH, DMSH or EMSH can be seated directly in the slots on the body. The BS code adds shock absorbers on the extension side for decelerating the table at end of stroke. We confirm the exact thrust, dimensions and allowable load-moment figures for this bore and stroke from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X30SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X30SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
At 25 mm bore this is the largest option in the HLS/HLSL range, so choose it when your application needs more push than a 20 mm or smaller bore can offer - thrust rises with bore size. The cross-roller HLSL guide suits work where rigidity and low deflection matter most; pick HLQ for anti-rust, dust-proof ball-bearing guidance, HLH for a miniature roller-ball guide, or HLF where a reduced body height is required. Confirm the 30 mm stroke sits within the bore 25 stroke table, and size loads and moments from the published tables and curves with our help.
The BS suffix means shock absorbers are fitted on the extension side only; blank is basic, A adds adjustable rubber stoppers at both ends, and B covers both ends. Ports are 1/8" with PT threading; G and T (NPT) versions are available if your pipework needs them.
Applications
Precision assembly stage
The cross-roller guide holds the table straight with low deflection, so small parts can be pressed, inserted or aligned repeatably on a 25 mm bore slide with shock absorbers cushioning each extension stroke.
Pick-and-place transfer
Dual rods double the thrust and the floating joint absorbs side torque, letting a gripper lift and place heavier components over a 30 mm horizontal move without swaying.
Gripper traverse on a machine bed
Mounted in one of three body orientations, the symmetrical HLSL table carries a gripper between two stations, with the extension-side shock absorber softening each arrival.
FAQ
What does the BS in HLSL25X30SBS mean?
It decodes the cushioning option: B is the shock-absorber version and S marks the extension side, so shock absorbers are fitted where the table extends. Other options are adjustable rubber stoppers (A) at both ends, or the basic version with bumpers only.
What pressure and speed should I run this cylinder at?
Bore 25 units operate at 0.15-0.7 MPa (22-100 psi) with clean air filtered to 40 um - the maximum working pressure is 0.7 MPa, not higher. Control speed meter-out within the 50-500 mm/s range, and let us confirm allowable load and moment from the datasheet for your mounting.