Airtac HLSL Precision Slide Table Cylinder HLSL25X50SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X50SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X50SA
The HLSL25X50SA is a bore 25, 50 mm stroke slide-table cylinder from AirTAC's HLSL series: a double-acting dual-rod cylinder with an integrated cross-roller guide. The cross rollers give the moving table high rigidity and low deflection, so a workpiece or gripper travels straight under load, and the symmetrical HLSL body gives you more freedom in how the unit is mounted. The dual rods double the thrust of an equivalent single-rod cylinder, and because the guide carries the side loads, a floating joint spares the rods from side torque in the application.
This is a genuine AirTAC part, and the position-detecting magnet is fitted as standard, so CMSH, DMSH or EMSH sensor switches can be clipped into the magnetic-switch slots on the body. The exact thrust, dimensions and load-moment figures for bore 25 are shown in the on-page spec table and the datasheet, and we are happy to confirm any of them for your application on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X50SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 sits at the top of the HLS bore range, so it gives the highest thrust in the series for heavier slides; if your load is lighter, bores 6 to 20 offer the same cross-roller guide with progressively less push. Keep the stroke within the 50 mm listed for bore 25, and choose the guide type deliberately: HLS/HLSL for maximum precision and rigidity, HLQ/HLQL for an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide, HLF for a low-height cross-roller body. The A in this code means adjustable rubber stoppers at both ends (AS is extension side only, AF retraction side only), and B-type shock absorbers are also offered in this bore. The blank thread code is PT; choose G or T for G or NPT ports. Allowable load and moment for bore 25 are published as tables and curves, so send us your application details and we will help size the unit.
Applications
Pick-and-place module
Use the 50 mm table travel to carry a small gripper or vacuum cup between a feed position and a placement nest, with the cross-roller guide keeping the pick and place points repeatable.
Precision assembly stage
Mount a press anvil or screwdriving head on the table for a short, straight insertion move where low deflection under load protects the assembly tolerance.
Conveyor stopper
Extend the table into the product flow as a stopper or pusher on a small-parts line, with the symmetrical body and cross-roller guide absorbing the contact without swerving off line.
FAQ
What does the A at the end of HLSL25X50SA mean?
It is the adjuster code: A means adjustable rubber stoppers fitted at both ends of the table travel. AS gives the rubber stopper on the extension side only and AF on the retraction side only; B, BS and BF shock-absorber versions are also available in bore 25.
What pressure and speed limits apply to this cylinder?
The maximum working pressure is 0.7 MPa and the operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Run it on air filtered to 40 um at 50-500 mm/s, typically set meter-out, between -20 and 70 C. Allowable load and moment for your mounting case come from the published datasheet tables and curves, which we confirm on request.