Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAF
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL25X50SAF Precision Slide Table Cylinder Specifications
- Model: HLSL25X50SAF
- Type: Double-acting guided cylinder with linear slide
- Bore size: Ø25mm
- Stroke: 50mm (±0.5mm tolerance)
- Operating pressure: 0.1–0.9 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Mounting style: Square flange base (ISO 15552 compatible)
- Position detection: Built-in magnet for sensor mounting
- Seal material: Heat-resistant NBR (Nitrile rubber)
- Temperature range: -20℃ to 80℃
- Weight: 1.85kg (including mounting hardware)
- Dimensions: 180mm(L) × 42mm(W) × 52mm(H)
- Rod end thread: M6×1.0 internal thread
- Repeat positioning accuracy: ≤±0.01mm
- Max side load capacity: 15N
- Lubrication: Pre-lubricated (Grease-free operation)
High-precision guided cylinder with integrated linear guide rails, featuring ultra-low friction coefficient (μ<0.003) for smooth reciprocating motion. The anodized aluminum construction provides corrosion resistance and thermal stability. Includes wear-resistant brass bushings and dual dust seals (IP54 rating). Requires 5μm filtered air with dew point -20℃ below ambient.
- Semiconductor wafer handling systems
- Precision optical component positioning
- Automated inspection equipment probes
- Pharmaceutical tablet pressing mechanisms
- 3C product assembly automation
Installation note:
Align guide rails within 0.05mm/m parallelism tolerance during mounting.
Recommended lubrication interval: 500km travel distance or 6 months.
Avoid lateral forces exceeding 20% of max capacity.
| Property | Property Value |
|---|---|
| sku | HLSL25X50SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <25 mm> |
| Stroke | <50mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.