Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAS
The HLSL25X50SAS is a bore 25, 50 mm stroke slide-table cylinder from AirTAC's HLSL series: a double-acting dual-rod cylinder with an integrated cross-roller guide. The cross-roller guide keeps the table travel straight and rigid, which is what you want when a gripper, tool or workpiece must arrive at the same position every cycle, and the symmetrical HLSL body gives flexible mounting options. The dual rods double the thrust of a single-rod cylinder of the same bore, and the integrated guide plus a floating joint spare the rods from side torque.
This is a genuine AirTAC part, and the magnet is fitted as standard so CMSH, DMSH or EMSH sensor switches can sit in the magnetic-switch slots on the body. Exact thrust, dimensions and load-moment values for bore 25 appear in the on-page spec table and the datasheet, and we will confirm them for your application on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X50SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Within the HLS bore range, bore 25 delivers the most push, so use it for heavier slides and step down to bores 6 to 20 when the load is lighter and a smaller unit will do. Confirm the 50 mm stroke against the bore 25 stroke table before ordering, and pick the guide on merit: HLS/HLSL cross-roller for precision and rigidity, HLQ/HLQL ball-bearing for anti-rust, dust-proof duty, HLH miniature roller-ball for best straightness, HLF for a low-height cross-roller body. The AS in this code means an adjustable rubber stopper on the extension side only; A gives both ends, AF the retraction side, and B-type shock absorbers are also offered in this bore. The blank thread code is PT, with G and T giving G and NPT ports. Allowable load and moment are published as tables and curves, so involve us when sizing the application.
Applications
Assembly press assist
Advance a light press or locating tool into an assembly on the extension stroke, with the rubber stopper giving a consistent end position and the cross-roller guide keeping the move square.
Machine loading slide
Feed parts from a magazine into a machining or testing position over the 50 mm stroke, with the rigid guide holding the part alignment cycle after cycle.
Stopper and eject station
Use the extension stroke to stop or eject parts on a small conveyor line, with the sensor switches confirming extend and retract states to the controller.
FAQ
Is the magnet on HLSL25X50SAS an option I have to order?
No. The whole HLSL series is magnet-fitted as standard; the S in the code simply reflects that. You only choose the sensor switch type, from CMSH, DMSH or EMSH, and it clips into the magnetic-switch slots on the body.
What medium and pressure should I run this cylinder on?
Run clean air filtered to 40 um at an operating pressure between 0.15 and 0.7 MPa (22-100 psi) for bore 25; 0.7 MPa is the maximum working pressure and proof pressure is 1.2 MPa. Speeds of 50-500 mm/s are supported, usually set meter-out, with an ambient range of -20 to 70 C.