Airtac HLSL Precision Slide Table Cylinder HLSL25X50SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X50SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X50SBF
The HLSL25X50SBF is the symmetrical AirTAC HLS cross-roller slide table in bore 25 with a 50 mm stroke. An air cylinder is built into a cross-roller linear guide, so the dual-rod table travels straight with high rigidity and low deflection; the dual rods double the thrust and the floating joint keeps side torque off the rods. The BF code means a shock absorber is fitted on the retraction side only, cushioning the table as it returns to the home end.
This is a genuine AirTAC part, and the magnet is standard on the series, not an option: add CMSH, DMSH or EMSH switches in the body slots for position feedback. We confirm the exact thrust, dimensions and load/moment ratings for this model from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X50SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X50SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives you the higher thrust of the HLSL cross-roller range at the standard 0.15-0.7 MPa (22-100 psi) operating band, and 50 mm is a published stroke for this bore. Pick BF when the stop that needs cushioning is on the retraction side; use B for both ends or BS for the extension side. Thread is PT here, with G and NPT (T) versions available. Load and moment limits are published as tables and curves rather than a single number, so route your workpiece mass and offset to us for confirmation.
Applications
Gripper traverse
Shuttles a parallel gripper between load and unload positions; the retraction-side shock absorber settles the return stroke at the home end.
Assembly press feed
Advances a small press or stake tool over the workpiece; the cross-roller guide keeps the tool path straight through the 50 mm stroke.
Stopper and reject slide
Used as a precise stopper or reject-actuating slide on a conveyor, where straight guided travel keeps parts aligned.
FAQ
Why choose the BF version instead of plain HLSL25X50S?
BF means a shock absorber is fitted on the retraction side of the stroke, damping the table as it returns. If your load also slams into the extension end, step up to B for shock absorbers on both ends, or use BS for the extension side only.
How much side load and moment can the table carry?
Allowable load and moment ratings are published as tables and deflection curves in the datasheet, not as a single figure, and they depend on the workpiece offset. Send us your mass and geometry and we will confirm them from the published data; the cylinder itself runs at 0.15-0.7 MPa (22-100 psi) on this bore, with 0.7 MPa the maximum working pressure.