Airtac HLSL Precision Slide Table Cylinder HLSL25X75SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X75SAS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X75SAS
The AirTAC HLSL25X75SAS is a symmetrical cross-roller slide table cylinder: a 25 mm bore, double-acting dual-rod air cylinder with an integrated cross-roller linear guide that holds the table on a straight, low-deflection path under load. At 75 mm stroke it covers moderate travel in a compact envelope, and the symmetrical body gives flexible mounting from either side. The dual-rod layout delivers higher thrust than a single rod of the same bore, while the built-in floating joint keeps side torque off the rods. The AS adjuster adds adjustable rubber stoppers on the extension side to cushion end-of-stroke impact.
This is a genuine AirTAC part with the position magnet fitted as standard, so CMSH, DMSH or EMSH sensor switches can be read from the slots on the body. Operating range for this 25 mm bore is 0.15-0.7 MPa (22-100 psi) on air filtered to 40 um. Exact thrust, dimensions and allowable load-moment figures are shown in the on-page spec table or datasheet, and we will confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X75SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore is the largest in this family, so it gives you the higher thrust end of the HLSL range - the bigger the bore, the more push at the same pressure. Cross-roller HLSL guides are the choice where precision, rigidity and load capacity matter most; choose HLQ for an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide, or HLF when installation height is tight. The 75 mm stroke sits within this bore's published stroke table. The AS code means adjustable rubber stoppers on the extension side only; A covers both ends, while B gives shock absorbers. Thread here is PT, with G and T as alternatives. For allowable load, moment and kinetic energy, size from the published tables and curves or ask us to confirm.
Applications
Pick-and-place
The cross-roller guide keeps the table straight while a gripper or suction cup lifts and places small parts, with the floating joint absorbing any misalignment from the mounting.
Gripper traverse
Use the 75 mm stroke to carry a gripper sideways between stations; the dual-rod cross-roller table resists deflection from off-center gripping loads.
Small-parts transfer
Index trays or blisters between positions on a compact assembly cell slide, with magnetic switches marking pick and drop positions.
FAQ
What does the AS in HLSL25X75SAS mean?
AS decodes as adjustable rubber stoppers fitted on the extension side only. A would give rubber stoppers on both ends, while B, BS and BF add shock absorbers (B covers both ends). These adjuster options exist only on the HLS/HLQ slide table family, and B-type shock absorbers are not offered on bore 6.
What pressure and speed should I run it at?
For this 25 mm bore the operating range is 0.15-0.7 MPa (22-100 psi), with 0.7 MPa the maximum working pressure. Run speeds between 50 and 500 mm/s on air filtered to 40 um; meter-out control is the usual way to keep travel smooth.