Airtac HLSL Precision Slide Table Cylinder HLSL25X75SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X75SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X75SBF
The AirTAC HLSL25X75SBF is a symmetrical cross-roller slide table cylinder: a 25 mm bore, double-acting dual-rod cylinder with an integrated cross-roller linear guide that delivers straight, rigid, low-deflection table travel across its 75 mm stroke. The symmetrical body allows flexible mounting, the dual-rod layout gives higher thrust than a single rod of the same bore, and the floating joint keeps side torque away from the rods. The BF adjuster fits a shock absorber on the retraction side only, cushioning the return stroke while leaving the extension end on its standard bumper.
This is a genuine AirTAC part with the magnet fitted as standard, so CMSH, DMSH or EMSH sensor switches read table position from the slots on the body. The 25 mm bore operates at 0.15-0.7 MPa (22-100 psi) on air filtered to 40 um. Exact thrust, overall dimensions and allowable load-moment values are in the on-page spec table or datasheet, and we confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X75SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X75SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore is the biggest in the HLSL range and therefore the higher-thrust option - bigger bore means more push at the same pressure. Stay with HLSL cross-roller guides when precision, rigidity and load capacity lead your spec; choose HLQ for anti-rust, dust-proof ball-bearing travel, HLH for a miniature roller-ball guide with best straightness, or HLF where a low-height body is required. The 75 mm stroke is inside this bore's published stroke table. BF means a shock absorber on the retraction side only; use B for shock absorbers both ends, or A/AS for adjustable rubber stoppers. Thread is PT, with G and T as options. Route load and moment sizing to the published tables and curves, or ask us.
Applications
Assembly stage
Carry a small fixture through an assembly or testing step on the cross-roller table's straight path, with the retraction-side shock absorber damping the return.
Stopper positioning
Use the guided table as a repeatable stopper for parts arriving on a feed track; the floating joint takes up track misalignment without loading the rods.
Small-parts transfer
Transfer components over the 75 mm stroke between stations, with the dual-rod cross-roller guide keeping the table rigid under off-center loads.
FAQ
Why choose BF instead of the plain B adjuster?
BF fits a shock absorber on the retraction side only, cushioning just the return stroke; B puts shock absorbers on both ends. If your extension side does not need damping, BF keeps the standard bumper there. These adjuster codes apply only to the HLS/HLQ slide table family - the HLH and HLF versions carry no adjuster code.
Can I run the HLSL25X75SBF above 0.7 MPa for more force?
No. The maximum working pressure is 0.7 MPa, even though proof pressure is 1.2 MPa (175 psi). For this 25 mm bore the operating range is 0.15-0.7 MPa (22-100 psi); to move heavier loads, step up to a larger bore rather than exceeding the pressure limit.