Airtac HLSL Precision Slide Table Cylinder HLSL6X10S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL6X10S is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL6X10S
The HLSL6X10S is a symmetrical cross-roller slide table cylinder combining a 6 mm bore AirTAC cylinder with an integrated cross-roller linear guide over a short 10 mm stroke. The dual opposed rods give light but well-controlled thrust suited to small payloads, while the cross-roller guide delivers the highest precision and rigidity of the HL range, keeping the tiny table travel straight with low deflection. A floating joint spares the rod from side torque, and the symmetrical body mounts cleanly on either side of the centerline - useful in tight miniature assemblies.
This is a genuine AirTAC part with the position magnet fitted as standard; the magnetic-switch slots on the body accept CMSH, DMSH or EMSH switches. It runs on air filtered to 40 um at 0.2-0.7 MPa (29-100 psi) with M5x0.8 ports and PT threads, works from -20 to 70 C, and covers 50-500 mm/s. Exact thrust, dimensions, and load and moment ratings for this bore and stroke are in the on-page table and datasheet - we confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL6X10S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL6X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 6 mm bore delivers light thrust, so size it for small, precise movements of light workpieces rather than pushing loads; the spec table shows the verified thrust. Within the HL series, choose cross-roller HLSL over ball-bearing HLQ when repeatability and rigidity matter most, and over HLH or HLF when you want the full-height cross-roller body rather than a low-height or miniature roller-ball alternative. The 10 mm stroke is one of the short standard strokes listed for the 6 mm bore.
This basic version has no adjuster code, so it uses the standard bumpers (note that B-type shock absorbers are not offered on bore 6 anyway). Ports are M5x0.8 with PT thread; G and T thread options exist. Route allowable load and moment sizing to the published tables and curves or to us.
Applications
Miniature pick-and-place
The short-stroke table transfers tiny components - pins, inserts, sensors - between a feeder and a subassembly, with the cross-roller guide giving repeatable positioning over just 10 mm of travel.
Precision dosing slide
Fitted with a microdispensing nozzle or ejector pin, the 6 mm table makes a short, straight push-off or deposit motion where deflection would ruin the placement.
Fine-adjustment stopper
The table acts as a repositionable stop or indexing fence for small parts on a miniature fixture, the guided travel holding the stop face square to the part flow.
FAQ
Do I need to order a magnet or switch version separately?
No. The S in HLSL6X10S simply reflects that the whole HL series is magnet-fitted as standard - it is not an option to add or decline. The magnetic-switch slots on the body take CMSH, DMSH or EMSH sensor switches for end-of-stroke detection.
How do I check what load this small table can carry?
Allowable load, moment, and deflection for the cross-roller guide are published as tables and curves in the datasheet, not as a single number, and they depend on the load's position and direction. Ask us and we will confirm the exact figures for the 6 mm bore and 10 mm stroke before you finalize the design.