Airtac HLSL Precision Slide Table Cylinder HLSL6X10SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL6X10SAS is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL6X10SAS
The HLSL6X10SAS is a symmetrical cross-roller slide table cylinder: the cylinder and a precision cross-roller linear guide share one body, so the table moves in a straight line with minimal deflection over its 10 mm stroke. The dual-rod layout gives bore 6 double the push of a single-rod cylinder of the same size, while the floating joint spares the rods from side torque applied through the workpiece. The symmetrical body gives mirrored workpiece mounting on both faces of the table.
This is a genuine AirTAC part with the magnet fitted as standard, so CMSH, DMSH or EMSH sensor switches read position from the slots on the body. It runs on air filtered to 40 um at 0.2-0.7 MPa (29-100 psi), takes a 1.2 MPa (175 psi) proof pressure, and works from -20 to 70 C at 50-500 mm/s. The AS code fits an adjustable rubber stopper on the extension side. We confirm exact thrust, dimensions and load-moment values from the datasheet or the on-page table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL6X10SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL6X10SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 6 delivers the lightest push in the HLSL range; when the application needs more force, move up to bore 8, 12, 16, 20 or 25 in the same cross-roller family. Prefer HLSL over HLQ when stiffness and low deflection outrank anti-rust and dust-proofing, over HLH when you want the cross-roller table rather than a miniature roller-ball guide, and over HLF when you do not need the reduced body height. The AS code here means an adjustable rubber stopper on the extension side; AF is the retraction side, blank is basic, and B-type shock absorbers start at bore 8. PT thread is standard, with G and NPT alternatives. Route your load and moment sizing to us so we can check them against the published tables and curves.
Applications
Small-parts transfer between nests
Shuttles light components a short 10 mm between a feed nest and a process nest, with the cross-roller guide holding the table true to its path.
Adjustment slide on assembly fixtures
Provides a fine positional slide for setting or clamping small assemblies, with the extension-side rubber stopper giving a controlled end of stroke.
Compact gripper traverse
Moves a miniature gripper sideways on cramped multi-station fixtures; the floating joint and dual rods absorb misalignment and double the light thrust.
FAQ
Do I need to order a magnet switch kit for the HLSL6X10SAS separately?
The magnet is fitted as standard on every HL-series model, so magnetic-switch detection is built in; you only choose the switch itself, from the CMSH, DMSH or EMSH ranges, and read it from the slots on the body. The AS ending means this model carries an adjustable rubber stopper on the extension side with PT ports.
What pressure limits apply to this cylinder?
Working pressure for bore 6 is 0.2-0.7 MPa (29-100 psi); the maximum working pressure is 0.7 MPa, and the proof pressure is 1.2 MPa (175 psi). Keep the speed within 50-500 mm/s, typically controlled by metering the exhaust air. Allowable load, moment and kinetic energy are taken from the published tables and curves, which we can confirm for your fixture.