Airtac HLSL Precision Slide Table Cylinder HLSL6X30SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL6X30SA is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL6X30SA
The HLSL6X30SA is a symmetrical cross-roller slide table cylinder with a 6 mm bore and 30 mm stroke, fitted with adjustable rubber stoppers at both ends so you can tune end-of-stroke cushioning to the cycle. The integrated cross-roller guide keeps the table travelling straight with low deflection, the dual-rod layout gives light but doubled thrust for its small bore, and the floating joint keeps side torque off the rods. The symmetrical HLSL body suits centred workpiece mounting.
A genuine AirTAC part, double-acting and magnet fitted as standard, with slots on the body for CMSH, DMSH and EMSH magnetic switches. It operates on air filtered to 40 um at 0.2-0.7 MPa (29-100 psi), 50-500 mm/s, -20 to 70 C, and withstands 1.2 MPa (175 psi) proof pressure. The on-page spec table and datasheet carry the exact thrust, dimensions and load/moment figures for this model - we confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL6X30SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL6X30SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
At bore 6 this model gives light thrust; move up to bore 8, 12, 16, 20 or 25 when you need more push. The S in the code is the standard magnet, not an option, and the A sets it apart from the basic HLSL6X30S: adjustable rubber stoppers on both ends for gentler, tunable deceleration than the plain bumper. Shock absorbers would be code B - not offered on bore 6 - so the rubber stopper is the cushioning upgrade available at this size.
Thread is PT; G and NPT (T) versions exist if your piping needs them. HLSL is the symmetrical cross-roller slide table - the highest-precision guide type in the range - while HLQL trades some rigidity for an anti-rust, dust-proof ball-bearing guide. Stroke 30 mm is within the bore-6 table; allowable load and moment are published as tables and curves, so route your payload sizing through us.
Applications
Assembly stage positioning
Adjustable rubber stoppers both ends let you soften the stops on a light assembly stage, protecting delicate parts at each end of the 30 mm travel.
Small-parts transfer slide
Move clips, pins or housings between stations with straight, low-deflection cross-roller travel and tuned deceleration at both ends.
Tray index stopper
Use the table as a precise, adjustable stop for indexing light trays or fixtures, with the stopper pressure set to match the part.
FAQ
What does the A in HLSL6X30SA change compared with the basic model?
The A adds adjustable rubber stoppers at both ends of the stroke, on top of the standard bumper cushioning, so you can tune deceleration for each direction. Note that shock absorbers (code B) are not offered on bore 6; they start from larger bores.
Can I confirm the load capacity before ordering?
Yes. Allowable load and moment for the HLSL series are published as tables and deflection curves in the datasheet, and the on-page spec table lists the exact thrust for this bore and stroke - send us your payload and orientation and we will confirm the figures.