Airtac HLSL Precision Slide Table Cylinder HLSL6X50SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL6X50SA is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL6X50SA
The HLSL6X50SA is a symmetrical cross-roller slide table cylinder: an air cylinder integrated with a cross-roller linear guide so the table travels straight with high rigidity and low deflection. The dual-rod layout gives light but stable push for a bore 6 unit, and the floating joint spares the rod from side torque so your tooling is not loaded off-axis. The 50 mm stroke suits short, repeatable moves where a symmetrical body helps balance the workpiece mount.
This is a genuine AirTAC part and the position magnet is fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH sensor switches. The SA code means adjustable rubber stoppers on both ends cushion the table at each end of travel. We confirm thrust, dimensions and load-moment ratings from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL6X50SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL6X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 6 is the smallest bore in the HLSL line, giving the lightest push of the range - step up to 8, 12, 16, 20 or 25 mm if you need more push, since a bigger bore delivers proportionally more force at the same pressure. Choose the HLSL cross-roller guide when precision and rigidity matter most; pick HLQ for an anti-rust, dust-proof ball-bearing guide, HLH for a miniature roller-ball guide with the best straightness, or HLF where a low-height body is required. The 50 mm stroke sits within the bore 6 stroke table. Adjustable rubber stoppers are fitted both ends (code A); shock absorbers (B type) are not offered on bore 6. Port thread is PT; G and NPT (T) variants exist. Send us your load and moment figures and we size the unit against the published tables and curves.
Applications
Pick-and-place of small parts
The cross-roller guide carries a suction cup or mini gripper along the 50 mm stroke with low deflection, keeping placement repeatable on light components.
Small-parts transfer slide
Symmetrical body and straight guided travel make this a tidy transfer stage between two stations on compact automation handling light parts.
Adjustable end-stop positioning
Adjustable rubber stoppers on both ends let you set exact stop points for locating or gauging light workpieces at each end of the stroke.
FAQ
What does the A in HLSL6X50SA mean, and are shock absorbers available?
A means adjustable rubber stoppers are fitted on both ends of the table to cushion and set the end positions. The alternative codes are AS (extension side only) and AF (retraction side only). Shock absorber options (B, BS, BF) are not offered on bore 6 - they start at larger bores. The magnet is fitted as standard, not an option.
What pressure and speed should I run this bore 6 slide table at?
Bore 6 operates at 0.2-0.7 MPa (29-100 psi) on filtered air to 40 um, with 0.7 MPa the maximum working pressure; proof pressure is 1.2 MPa. Speed range is 50-500 mm/s, typically set meter-out. Allowable load and moment values must be confirmed against the published datasheet tables and deflection curves before you mount a workpiece.