Airtac HLSL Precision Slide Table Cylinder HLSL6X50SAF
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL6X50SAF Precision Slide Table Cylinder Specifications
- Model: HLSL6X50SAF
- Series: HLSL6 (6mm rail width)
- Bore size: 16mm
- Stroke: 50mm ±0.5mm
- Mounting type: Through-hole base mounting
- Operating pressure: 0.05-0.7 MPa
- Buffer type: Adjustable rubber cushion
- Repeat positioning accuracy: ±0.01mm
- Temperature range: -10℃ to 80℃
- Material: Aluminum alloy body, hardened steel guide rails
- Port size: M5x0.8 (Dual ports)
- Piston rod thread: M6x1.0
- Lubrication: Pre-lubricated (Grease-free operation)
- Protection rating: IP54 (Dust & splash resistant)
- Weight: 0.68 kg ±3%
- Dimensions: 190mm(L) × 42mm(W) × 26mm(H)
- Certification: ISO 6432, VDMA 24562
High-precision linear motion cylinder with dual guide rails and anti-creep design, featuring ultra-low friction coefficient (μ≤0.003) for micron-level positioning. Integrated pre-loaded ball bushings ensure minimal backlash during reciprocation. Corrosion-resistant anodized surface with integrated T-slot for accessory mounting.
- PCB component insertion machines
- Lens polishing equipment positioning stages
- Semiconductor wafer handling systems
- 3D inspection probe manipulators
- Micro-dispensing robot arms
Installation note:
Maintain 0.02mm/m parallel alignment tolerance between rail and load direction.
Use torque-controlled tightening (1.2N·m max) for mounting screws.
Perform break-in operation (50 cycles at 0.1MPa) before precision tasks.
| Property | Property Value |
|---|---|
| sku | HLSL6X50SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | <6mm> |
| Stroke | <50mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.