Airtac HLSL Precision Slide Table Cylinder HLSL8X10SBS

The HLSL8X10SBS is a symmetrical cross-roller slide table cylinder: an 8 mm bore, 10 mm stroke double-acting dual-rod air cylinder with an integrated cross-roller guide, AirTAC's highest-precision guide type. The cross-rollers give the moving table excellent rigidity and very low deflection under load, while the symmetrical body lets you mount the workpiece or the body from either side with the same envelope. The two rods double the output for a light-to-moderate push at this small bore, and the built-in floating joint means the rods take no side torque from your fixture. This SBS version adds shock absorbers on the extension side for controlled deceleration at end of stroke.

This is a genuine AirTAC part, magnet-fitted as standard with magnetic-switch slots on the body, so CMSH, DMSH and EMSH sensor switches can be mounted directly. It runs on air filtered to 40 um at 0.2-0.7 MPa (29-100 psi), 50-500 mm/s, from -20 to 70 C. We confirm the exact thrust, dimensions and allowable load/moment figures for this bore and stroke from the on-page specification table or the datasheet on request.

At 8 mm bore this is the light-thrust end of the HLSL range; if you need more push at the same stroke, step up to a 12, 16, 20 or 25 mm bore - a bigger bore always delivers more thrust. Choose HLSL when you want the highest precision and rigidity of a cross-roller guide; pick HLQ for anti-rust, dust-proof ball-bearing travel, HLH for a miniature roller-ball guide with the best straightness, or HLF where a reduced body height matters. The 10 mm stroke is within the published bore 8 stroke table, and the BS suffix gives shock absorbers on the extension side only (other options: A rubber stoppers both ends, B both ends, AS/AF single side). Port thread here is PT; specify G or T if your piping needs it. For load, moment and kinetic-energy sizing, contact us - these are published as tables and curves, not single numbers.