Airtac HLSL Precision Slide Table Cylinder HLSL8X50SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL8X50SA is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL8X50SA
The HLSL8X50SA is a genuine AirTAC cross-roller symmetrical slide-table cylinder with an 8 mm bore and 50 mm stroke. The dual-rod double-acting design pairs an air cylinder with a precision cross-roller linear guide so the table moves straight with minimal deflection. The symmetrical body gives equal mounting access from either side, and the floating joint isolates the rod from side torque.
A standard magnet is fitted for position sensing with CMSH, DMSH, or EMSH switches in the body slots. The A adjuster provides adjustable rubber stoppers at both stroke ends for controlled end-position contact. We confirm thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL8X50SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL8X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 8 mm bore is suited to compact guided travel with light to moderate thrust; step up to a larger bore in the HLSL range for more push force. The cross-roller guide offers the highest precision and rigidity among AirTAC slide tables. Select the 50 mm stroke from the bore's published table. The A adjuster adds adjustable rubber stoppers at both ends, giving you a tunable end-position stop without the complexity of shock absorbers; choose B if you need shock absorption instead. Thread is PT standard; request G or NPT if needed. Route load, moment, and kinetic-energy sizing to us for verification against published tables and curves.
Applications
Pick-and-Place
Transfers small parts between two positions with cross-roller precision and rubber stoppers that provide a soft, adjustable end stop for delicate items.
Lane Diverter
Pushes lightweight product cartons from one conveyor lane to another over a 50 mm stroke with the symmetrical body fitting between guide rails.
Gauge Positioner
Advances a measuring probe to a repeatable stop position where the rubber stoppers set the exact contact point on the workpiece.
FAQ
What does the A adjuster mean on the HLSL8X50SA?
The A code adds adjustable rubber stoppers at both the extension and retraction ends of the slide table. You can fine-tune the end-of-stroke contact position by turning the stopper, which is useful when the workpiece requires a soft, precise landing rather than a hard metal stop.
Can the HLSL8X50SA handle high side loads?
The cross-roller guide provides high rigidity and low deflection, but allowable load and moment values are published in the datasheet as Wmax and moment tables with deflection curves. Maximum working pressure is 0.7 MPa (100 psi). We confirm sizing against those tables on request.