Airtac HLSL Precision Slide Table Cylinder HLSL8X75SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL8X75SAS is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL8X75SAS
The HLSL8X75SAS is a symmetrical cross-roller slide table cylinder: an 8 mm bore dual-rod air cylinder with an integrated cross-roller guide, so the table travels straight under load with low deflection. The dual rods double the thrust of a single-rod cylinder of this bore, the floating joint spares the rods from side torque, and the symmetrical body mounts cleanly in either orientation. The AS adjuster places an adjustable rubber stopper on the extension side to soften impact as the table reaches out.
This is a genuine AirTAC part with a position-detection magnet fitted as standard and magnetic-switch slots on the body, ready for CMSH, DMSH or EMSH sensor switches. Exact thrust, overall dimensions and allowable load and moment figures are confirmed from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL8X75SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL8X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Size the bore for thrust: 8 mm delivers light to moderate push, and 12, 16, 20 or 25 mm gives progressively more push at the same pressure. HLS cross-roller tables are the choice for the highest precision, rigidity and load capacity; HLQ ball-bearing handles anti-rust, dust-proof duty, HLH miniature roller-ball gives the best straightness in bores 6 to 20, and HLF suits tight height envelopes. Verify that 75 mm falls within the bore 8 stroke table before ordering. The AS in this code means an adjustable rubber stopper on the extension side; AF covers the retraction side, A both ends, and B-type codes give shock absorbers instead. The port thread here is PT, with G and NPT options available. Send us your load and moment figures and we will size the model from the published tables and curves.
Applications
Gripper traverse
Move a pneumatic gripper between stations on a 75 mm path; the cross-roller guide keeps the grip point aligned and the extension-side stopper cushions each reach.
Pick-and-place
Pick parts from a feeder and place them into a nest; the dual rods and floating joint keep the thrust steady even with slight mounting misalignment.
Small assembly press stage
Advance a light pressing or insertion tool with straight guided travel; the cross-roller guide limits deflection so the part stays square at the work face.
FAQ
What does the AS in HLSL8X75SAS specify?
AS means an adjustable rubber stopper fitted on the extension side only, to cushion the table at the end of its outward stroke. AF gives a stopper on the retraction side, A gives stoppers at both ends, and B-type codes give shock absorbers instead. Note that the S before the adjuster code is always present: the position-detection magnet is standard on the whole series.
Does HLSL8X75SAS include position sensors?
The magnet is fitted as standard and magnetic-switch slots are machined on the body, but the switches themselves are ordered separately. Use AirTAC CMSH, DMSH or EMSH reed or solid-state switches to detect table position along the 75 mm stroke.