Airtac HLSL Precision Slide Table Cylinder HLSL8X75SB
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL8X75SB is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL8X75SB
The HLSL8X75SB is a symmetrical cross-roller slide table cylinder: a genuine AirTAC dual-rod, double-acting cylinder with an integrated cross-roller guide that keeps the moving table travelling straight under load. The dual rods double the push (light-to-moderate for this 8 mm bore) and a floating joint spares the rods from side torque at the workpiece coupling. The 75 mm stroke gives a longer traverse than short-stroke slides, and shock absorbers at both ends cushion end-of-stroke impact for repeatable positioning.
This is a genuine AirTAC part with a position-detection magnet fitted as standard; the magnetic-switch slots on the body accept CMSH, DMSH and EMSH sensor switches. Air medium is filtered to 40 um, proof pressure is 1.2 MPa (175 psi), working temperature -20 to 70 C and speed 50-500 mm/s. The exact thrust, dimensions and load-moment ratings for this model are in the on-page spec table and datasheet - we will confirm them on request.
Airtac HLSL Precision Slide Table Cylinder HLSL8X75SB Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL8X75SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 8 mm bore gives light thrust; if you need more push, step up to a 12-25 mm bore in the same series and we will confirm the exact figure from the datasheet. Choose the HLSL cross-roller guide when you want the highest precision and rigidity of the HL line in a symmetrical body; HLQ suits anti-rust, dust-proof ball-bearing running, HLH is the miniature roller-ball option, and HLF when installation height is tight. The 75 mm stroke sits within the bore-8 stroke table.
The B in this code means shock absorbers at both ends; A (adjustable rubber stopper) and single-side options BF (retraction) or BS (extension) are the alternatives, while a blank code keeps basic bumpers. Port thread here is PT; order G for G threads or T for NPT. Send us your load and moment figures and we will size the unit against the published tables and deflection curves.
Applications
Pick-and-place
Lift and place small components between stations; the cross-roller guide resists deflection so the part arrives where the gripper left it.
Small-parts transfer
The 75 mm stroke provides a longer traverse for feeding parts along a line or between fixtures on a compact assembly cell.
Assembly stage
Mount a mini gripper or press tool on the table; the symmetrical body and dual rods keep the tool square to the work.
FAQ
What does the B in HLSL8X75SB mean?
On the HLS/HLQ series the letter after the S (magnet, always present) is the cushion adjuster. B means shock absorbers at both ends. BF is shock absorber on the retraction side only and BS on the extension side only; B-type is not offered on bore 6 but is available on this 8 mm bore. A stands for adjustable rubber stoppers and a blank code keeps the basic bumpers.
What pressure and speed should I run it at?
For this 8 mm bore the operating pressure is 0.2-0.7 MPa (29-100 psi); never exceed the 0.7 MPa maximum working pressure. Meter-out the air to stay within the 50-500 mm/s speed range and filter the supply to 40 um. Allowable load and moment ratings are confirmed from the datasheet for your specific stroke.