Airtac HLSL Precision Slide Table Cylinder HLSL8X75SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL8X75SBF is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL8X75SBF
The HLSL8X75SBF is the symmetrical version of AirTAC's cross-roller slide table: a dual-rod, double-acting cylinder with an integrated cross-roller guide built for straight, rigid table travel. The two rods double the push (light for this 8 mm bore) while the floating joint keeps side torque off the rods, protecting the guide and the workpiece coupling. At 75 mm the stroke covers longer transfer moves, and a shock absorber on the retraction side soaks up impact as the table returns.
This is a genuine AirTAC part and the magnet is fitted as standard, so the body slots take CMSH, DMSH and EMSH sensor switches directly. Air filtered to 40 um, proof pressure 1.2 MPa (175 psi), temperature -20 to 70 C, speed 50-500 mm/s. Exact thrust, overall dimensions and load-moment limits are published in the on-page table and datasheet; we will confirm them for this model on request.
Airtac HLSL Precision Slide Table Cylinder HLSL8X75SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL8X75SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 8 mm bore suits light-thrust duties; a 12, 16, 20 or 25 mm bore in the same series brings more push, with exact figures taken from the datasheet rather than guessed. HLSL is the pick for maximum cross-roller precision and rigidity in a symmetrical body; HLQ gives anti-rust, dust-proof ball-bearing running, HLH the miniature roller-ball guide, HLF the low-height cross-roller body. Stroke 75 mm is inside the bore-8 table.
The BF code fits a shock absorber on the retraction side only; choose B for both ends, BS for extension side only, A for adjustable rubber stoppers or blank for basic bumpers. This unit carries PT port threads; order G or T for G or NPT. Load and moment sizing is done against the published tables and curves - send us your figures and we will check the fit.
Applications
Gripper traverse
Carry a compact gripper across a 75 mm span; the cross-roller guide holds its line so the jaws meet the part squarely.
Stopper position
Extend the table to stop or index parts on a conveyor; the retraction-side damper cushions each return stroke.
Small-parts feed
Advance components one at a time into a fixture or tester; low guide deflection keeps repeat positions consistent.
FAQ
Why choose the BF version over the plain B or BS?
The cushion option is a selection choice, not an afterthought. BF fits a shock absorber on the retraction side only, ideal when the return impact is the concern and you want a lighter damper set than the both-ends B version. BS damper is extension-side only, and A gives adjustable rubber stoppers. All HLS/HLQ cushion codes are decoded from the part number, so order exactly what your cycle needs.
How much load can the table carry and what thrust does it give?
Thust, allowable load and moment figures are published per bore and stroke in the datasheet tables and deflection curves; we confirm the exact values for your application on request rather than quoting approximations. What we can state here: the dual rods double the push of the 8 mm bore, max working pressure is 0.7 MPa (0.2 MPa minimum for this bore), and speed should be metered between 50 and 500 mm/s.