Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT
The AirTAC Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT is a miniature linear guide on a 12 mm stainless-steel rail with recirculating-ball carriage. It is the small end of the range, for light-duty precision positioning in a tight envelope — compact stages, small pick-and-place heads and inspection fixtures.
- SeriesLRM
- Supplied asComplete guide set
- SizeLRM12
- Rail width12 mm
- Carriage lengthLong carriage
- Carriages1
- Rail length370 mm
- AccuracyP — precision grade
- PreloadC — medium preload
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT
Among our LRM12 sets, what moves the price is not the 12 mm rail width but the length of rail - stocked sets span a wide price band while the width barely changes, so trimming travel is the first cost lever. This code spends its 370 mm deliberately: one long carriage in medium preload C, precision grade P, bottom-mounted.
The trailing T means the fixing screws enter from beneath the 370 mm stainless rail, leaving the top face clean - useful where a cover plate or worktable bolts over the guide. Precision P is the tighter accuracy class, and medium preload C makes the sliding fit stiffer but less tolerant of alignment error, so prepare the mounting faces ground or finish-milled and observe the M3 torque figures. The carriage runs on Japanese ISO 3290 G10 balls - a grade for the balls alone - behind a double-lip seal and an outer cover, and the surroundings must stay at or below 80 C, a real constraint beside a heater or a laser. No load or moment rating is published for LRM; send the RFQ and we confirm the figure for this exact code.
Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT Technical Specifications
| Model | Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT |
|---|---|
| Series | LRM Series Miniature Linear Guide |
| Supplied as | Complete guide set |
| Construction | Recirculating ball, stainless-steel rail, common-rail design |
| Size code | LRM12 |
| Rail width | 12 mm |
| Carriage length | Long carriage |
| Carriages supplied | 1 |
| Rail length | 370 mm (spliced sections) |
| Load & moment ratings | Not published for this series — ask us to confirm for your model |
|---|---|
| Accuracy grade | P — precision grade |
| Preload grade | C — medium preload |
| Mounting screws | M2 or M3 rail screws depending on size |
| Lubrication | Pre-filled with Kyodo Yushi PS No. 2; top up through the rear lubrication hole |
| Ambient temperature | Up to 80 °C ambient, 100 °C transient peak |
| Interchangeability | LRM carriages fit LRM rails of the same model |
Specifications follow the official AirTAC LRM catalogue. The catalogue does not publish load or moment ratings, running parallelism, speed limits, or carriage base material for LRM. We will not quote a figure we cannot source — ask us and we will confirm it for your model.
Model Code: Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT
| LRM | LRM Series Miniature Linear Guide. |
|---|---|
| 12 | Size code. |
| L | Long carriage. |
| 1X370 | 1 carriage on a 370 mm rail. |
| S… | End-hole offset from the rail end, in mm. |
| C | C — medium preload — higher preload raises rigidity and tightens how flat the mounting surface must be. |
| P | P — precision grade. |
What Is In The Box
| This order | Complete guide set |
|---|---|
| Rail | Yes, 370 mm |
| Carriage | Yes, 1 |
Rail and carriage(s) supplied together, matched as a set. If you are not sure which form you need, send us the machine or the original part number and we will confirm it before you order.
Where the Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT Is Used
Fiber-optic connector polish fixture
Holding connectors true over a polish stroke; precision P grade and a preloaded long carriage keep the ferrule angle stable through each pass.
Lab autosampler arm rail
A light autosampler head traveling a fixed 370 mm path between vial trays; bottom-mount lets the deck plate sit flush over the rail.
Wafer pre-alignment stage
A gentle pre-alignment slide for small wafer carriers at a bench near process equipment, where the 80 C ambient ceiling and the sealed, covered carriage earn their place.
Is the Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT the Right Guide?
Size this axis in that order: trim rail length before anything else, then decide whether the load honestly needs a published rating - if it does, quote LSH, which lists per-carriage dynamic, static and moment figures that LRM simply does not publish, and we verify LRM capacity model by model instead. Short, stiff, crossed-roller travel belongs to LGC. Then confirm the rest of the match: complete set with the rail included, 12 mm width, long carriage, one block, 370 mm length, preload C (rigid, tighter assembly), P accuracy, bottom-mount direction, and the load rating agreed with us before you commit.
Quick checklist
- ✓ Complete set, carriage only, or rail only?
- ✓ Load and moment confirmed with us
- ✓ Travel length and mounting space
- ✓ Accuracy grade and preload
- ✓ Mounting surface ground or finish-milled
- ✓ Pairing code, if replacing a part
Installation & Maintenance Notes
- check Mounting surface must be ground or finish-milled.
- check Torque the rail screws per the recommended figures, in sequence.
- check Keep the mounting corner radius inside the stated R maximum.
- check Do not angle the carriage onto the rail; balls can drop out.
- check Drive the supplied bolt caps into the mounting holes.
- check Re-grease every 100 km of travel or every 3–6 months.
- check Installation by qualified personnel per AirTAC docs.
Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT FAQ
12 mm wide stainless rail, 370 mm long, one long carriage, preload C (medium), accuracy P (precision), bottom-mount, 10 mm end-hole offset. M3 screw torque: 196 N.cm into steel, 127 N.cm into cast iron, 98 N.cm into aluminium. Maximum ambient temperature 80 C with short peaks to 100 C. Re-grease every 100 km of travel or every 3 to 6 months. Load, moment, parallelism and speed ratings are not published for LRM; the capacity of this exact model is confirmed with us before ordering.
Carriage-only parts exist under BK codes carrying a pairing letter that must match the rail - LRM12L1X370S10CPT is not one of those; it is the full set with the 370 mm rail included. For a spare, quote the BK code printed on your original carriage; very few carriage-only codes are carried, so most are made to order. Handle spare carriages carefully: despite ball retention, inserting at an angle or swapping quickly can still drop balls, so plan on a dummy rail for swaps.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac LRM Miniature Linear Guide LRM12L1X370S10CPT
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours. We can also confirm the load and moment rating for this model.