Airtac LRM Miniature Linear Guide LRM12N1X95S10AP
The AirTAC Airtac LRM Miniature Linear Guide LRM12N1X95S10AP is a miniature linear guide on a 12 mm stainless-steel rail with recirculating-ball carriage. It is the small end of the range, for light-duty precision positioning in a tight envelope — compact stages, small pick-and-place heads and inspection fixtures.
- SeriesLRM
- Supplied asComplete guide set
- SizeLRM12
- Rail width12 mm
- Carriage lengthStandard carriage
- Carriages1
- Rail length95 mm
- AccuracyP — precision grade
- PreloadA — no preload
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac LRM Miniature Linear Guide LRM12N1X95S10AP
LRM12N1X95S10AP is a single-carriage miniature guide set on a 95 mm stainless-steel rail, 12 mm wide, built to the precision P accuracy grade. The standard-length recirculating-ball carriage ships pre-filled with Kyodo Yushi PS No. 2 grease; wipe off the rust-preventive oil, work the carriage along the rail and confirm an even film before first use.
Two economics points matter for this part. Across our stocked LRM12 range, rail length - not rail width - drives the price, and this short 95 mm rail sits toward the affordable end of the roughly $66 to $831 stocked span. Availability is equally strong because 924 of the 988 stocked LRM sets are size 12. On the design side, the common-rail profile accepts any other LRM12 block later, and the outer cover plus double-lip seal keep fine debris away from the raceway, where a particle would show up as a hitch in fine positioning. The balls are ISO 3290 G10 grade - a ball-only specification - and ambient temperature must not exceed 80 C, peaking at 100 C. Load and moment ratings are absent from the published data; request the RFQ and we confirm them for this model.
Airtac LRM Miniature Linear Guide LRM12N1X95S10AP Technical Specifications
| Model | Airtac LRM Miniature Linear Guide LRM12N1X95S10AP |
|---|---|
| Series | LRM Series Miniature Linear Guide |
| Supplied as | Complete guide set |
| Construction | Recirculating ball, stainless-steel rail, common-rail design |
| Size code | LRM12 |
| Rail width | 12 mm |
| Carriage length | Standard carriage |
| Carriages supplied | 1 |
| Rail length | 95 mm |
| Load & moment ratings | Not published for this series — ask us to confirm for your model |
|---|---|
| Accuracy grade | P — precision grade |
| Preload grade | A — no preload |
| Mounting screws | M2 or M3 rail screws depending on size |
| Lubrication | Pre-filled with Kyodo Yushi PS No. 2; top up through the rear lubrication hole |
| Ambient temperature | Up to 80 °C ambient, 100 °C transient peak |
| Interchangeability | LRM carriages fit LRM rails of the same model |
Specifications follow the official AirTAC LRM catalogue. The catalogue does not publish load or moment ratings, running parallelism, speed limits, or carriage base material for LRM. We will not quote a figure we cannot source — ask us and we will confirm it for your model.
Model Code: Airtac LRM Miniature Linear Guide LRM12N1X95S10AP
| LRM | LRM Series Miniature Linear Guide. |
|---|---|
| 12 | Size code. |
| N | Standard carriage. |
| 1X95 | 1 carriage on a 95 mm rail. |
| S… | End-hole offset from the rail end, in mm. |
| A | A — no preload — higher preload raises rigidity and tightens how flat the mounting surface must be. |
| P | P — precision grade. |
What Is In The Box
| This order | Complete guide set |
|---|---|
| Rail | Yes, 95 mm |
| Carriage | Yes, 1 |
Rail and carriage(s) supplied together, matched as a set. If you are not sure which form you need, send us the machine or the original part number and we will confirm it before you order.
Where the Airtac LRM Miniature Linear Guide LRM12N1X95S10AP Is Used
Light pick-and-place head
Carries a small vacuum head on a compact gantry, where the zero-preload A grade trims friction so fast, short cycles stay easy on the drive.
First-article checking bench
Runs a dial indicator across freshly machined parts on a shop-floor bench, relying on the P grade for repeatable travel.
Small-parts diverter gate
A sliding gate shunts tiny components between two miniature conveyor lanes on a packaging line, cycling a short stroke all shift.
Is the Airtac LRM Miniature Linear Guide LRM12N1X95S10AP the Right Guide?
Start from the load: if it is substantial or overhung, LSH is the series to size from, because AirTAC publishes dynamic, static and moment figures per LSH carriage and publishes nothing equivalent for LRM. If the travel is short and crossed-roller rigidity matters more than stroke, LGC is the cross-series alternative. Then confirm this configuration line by line - complete set, 12 mm rail, standard block, single carriage, 95 mm rail length, preload grade A (no interference, lowest drag), precision P grade, top-mount holes. Carriage replacements need the pairing letter from the original part. We confirm the load rating for this model when the RFQ arrives.
Quick checklist
- ✓ Complete set, carriage only, or rail only?
- ✓ Load and moment confirmed with us
- ✓ Travel length and mounting space
- ✓ Accuracy grade and preload
- ✓ Mounting surface ground or finish-milled
- ✓ Pairing code, if replacing a part
Installation & Maintenance Notes
- check Mounting surface must be ground or finish-milled.
- check Torque the rail screws per the recommended figures, in sequence.
- check Keep the mounting corner radius inside the stated R maximum.
- check Do not angle the carriage onto the rail; balls can drop out.
- check Drive the supplied bolt caps into the mounting holes.
- check Re-grease every 100 km of travel or every 3–6 months.
- check Installation by qualified personnel per AirTAC docs.
Airtac LRM Miniature Linear Guide LRM12N1X95S10AP FAQ
Rail 12 mm wide and 95 mm long, end holes 10 mm from each end, one standard-length carriage, preload grade A (none), accuracy grade P (precision), rail mounted from the top. Screws torque by base material - M2: 58.8 N.cm steel, 39.2 N.cm cast iron, 29.4 N.cm aluminium; M3: 196, 127 and 98 N.cm. Ambient limit 80 C with peaks to 100 C; re-grease with Kyodo Yushi PS No. 2 every 100 km of travel or every 3 to 6 months. The published data carries no load or moment ratings for LRM - send the RFQ and we confirm the figures for this model before you commit.
LSH is the larger series and the one to size from when the load is meaningful: its catalogue lists dynamic, static and moment ratings per carriage, giving you numbers to calculate against. LRM, this miniature series, publishes no such table, so capacity is confirmed per model with us - that is the trade for a 12 mm wide, 95 mm long, precision P-grade slide in a tight envelope. For short strokes needing crossed-roller rigidity, LGC is the other alternative. If the duty is light and the space is small, stay here and send the RFQ.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac LRM Miniature Linear Guide LRM12N1X95S10AP
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours. We can also confirm the load and moment rating for this model.