Airtac LSH Linear Guide Rail LSH15HN2X630S15CN-M4
2. High Rigidity Four-Directional Equal Load Design: Incorporates 4-row ball circuits with 45° contact angle configuration, achieving optimal two-point contact for bidirectional radial/lateral load capacity. Optional preload application enhances system rigidity when required.
3. Interchangeability: Stringent manufacturing precision ensures dimensional consistency within stable tolerances. Integrated retainer design prevents ball dislodgement, enabling between and matching guideways while preserving operational smoothness, preload integrity, and motion accuracy.
Category: Linear Guides | Brand: AIRTAC | Series: LSH
AirTAC LSH15HN2X630S15CN-M4 Linear Guide Rail Specifications
- Model: LSH15HN2X630S15CN-M4
- Series: LSH Heavy Load Precision Series
- Rail type: Miniature linear guide with 4-way equal load design
- Rail width: 15mm (nominal size)
- Effective length: 630mm ±0.1mm
- Block quantity: 2 sliders included
- Accuracy grade: Normal grade (C) with ±50μm/m straightness
- Preload level: Medium preload (N2)
- Sealing: Triple labyrinth seal + wiper system (S15)
- Mounting hole pattern: M4 threaded holes at 30mm pitch
- Dynamic load capacity (C): 6.3kN
- Static load capacity (C0): 9.8kN
- Material: Carbon steel with black oxide coating
- Operating temperature: -20℃ to 80℃
- Lubrication: Pre-lubed with lithium complex grease
- Weight: 2.8kg (complete set with 2 sliders)
- Dimensions: 630mm(L) × 24mm(W) × 15mm(H)
- Protection rating: IP54 (dust protected & water splash resistant)
High-rigidity linear motion system featuring optimized ball circuit design for smooth operation under heavy moment loads. The HN-series profile enhances vibration damping by 18% compared to standard models. Integrated sealing system extends relubrication intervals to 1,000km travel distance in normal conditions.
- High-speed CNC tool changer mechanisms
- Semiconductor wafer handling robots
- Precision optical inspection equipment
- Automated pharmaceutical packaging lines
- 3D printing gantry systems
Installation note:
Use torque-controlled wrench (0.7-0.9Nm for M4 screws) and follow diagonal tightening sequence.
Maintain 0.02mm/m alignment accuracy during rail mounting. Clean rail surfaces with #120+ abrasive paper before installation.
| Property | Property Value |
|---|---|
| sku | LSH15HN2X630S15CN-M4 |
| Slider Width | <15mm> |
| Slide Block Type | Square Body |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.