Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6
The AirTAC Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6 is a standard-type profile linear guide on a 28 mm wide rail. Four rows of balls contact X-shaped raceways at a 45° angle, so the guide carries load equally in all four directions and absorbs small mounting errors inside the carriage instead of binding.
- SeriesLSH
- Supplied asComplete guide set
- SizeLSH30
- Rail width28 mm
- Carriage lengthStandard carriage
- Carriages1
- Rail length200 mm
- AccuracyN — normal grade
- PreloadA — no preload
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6 Technical Specifications
| Model | Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6 |
|---|---|
| Series | LSH Series Linear Guide |
| Supplied as | Complete guide set |
| Construction | Recirculating ball, four ball rows on X-shaped raceways at a 45° contact angle, self-aligning |
| Size code | LSH30 |
| Rail width | 28 mm (the size code is not the rail width above size 20) |
| Carriage style | Square (compact) |
| Carriage length | Standard carriage |
| Carriages supplied | 1 |
| Rail length | 200 mm |
| Basic dynamic load rating C | 37.4 kN per carriage |
|---|---|
| Basic static load rating C0 | 55.0 kN per carriage |
| Allowable static moment | MR 0.66 / MP 0.67 / My 0.67 kN·m |
| Accuracy grade | N — normal grade |
| Preload grade | A — no preload |
| Mounting screws | M8 — 3040 N·cm into steel, 2010 cast iron, 1470 aluminium |
| Lubrication | Pre-filled with Mobilux EP2; re-grease every 100 km of travel or every 3–6 months |
| Interchangeability | LSH carriages fit LSH rails of the same model |
Specifications follow the official AirTAC LSH catalogue. The catalogue page does not state the carriage or rail base material. Sizes 35 and 45 exist in the catalogue but are not stocked here; they are available to order.
Model Code: Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6
| LSH | LSH Series Linear Guide. |
|---|---|
| 30 | Size code — note the rail is 28 mm wide, not 30 mm. |
| H / F1 / F2 / F3 | Carriage style: square, or flange mounted from the top, bottom, or both. |
| N | Standard carriage. |
| 1X200 | 1 carriage on a 200 mm rail. |
| S… | End-hole offset from the rail end, in mm. |
| A | A — no preload — higher preload raises rigidity and tightens how flat the mounting surface must be. |
| N | N — normal grade. |
| -M4 / -M6 / -A01… | Grease nipple or tube-fitting type. Restricted by size: size 15 the M4 family, 20–35 the M6 family, 45 the PT1/8 family. |
What Is In The Box
| This order | Complete guide set |
|---|---|
| Rail | Yes, 200 mm |
| Carriage | Yes, 1 |
Rail and carriage(s) supplied together, matched as a set. If you are not sure which form you need, send us the machine or the original part number and we will confirm it before you order.
Installation & Maintenance Notes
- check Mounting surface must be ground or finish-milled.
- check Torque the rail screws per the recommended figures, in sequence.
- check Keep the mounting corner radius inside the stated R maximum.
- check Do not angle the carriage onto the rail; balls can drop out.
- check Drive the supplied bolt caps into the mounting holes.
- check Re-grease every 100 km of travel or every 3–6 months.
- check Installation by qualified personnel per AirTAC docs.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac LSH Linear Guide Rail LSH30HN1X200S10AN-M6
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.