The AirTAC AirTAC MA25X600SCA Mini Cylinder Bore 25 600 mm Stroke is a genuine double acting standard round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
A 600 mm stroke pushes the MA series well past its usual 500 mm ceiling, so this MA25X600SCA is a made-to-order build of AirTAC's riveted, round-body mini cylinder in a stainless-steel barrel. It is double acting with fixed anti-impact bumper pads, runs on filtered air at 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s, and takes its supply through 1/8 in PT ports. At 0.5 MPa the 25 mm bore delivers 245.3 N on extend, which leaves roughly 147 N of real working push once you plan a sensible margin. The rolled stainless body and hard-chrome plated 10 mm rod shrug off damp shop air and light washdown far better than painted minis, while the CA pivot eye on the back cover lets the cylinder swing through linkages without extra brackets. A magnet is built in, so CMSG, DMSG or EMSG switches drop straight on for end-of-stroke signalling. Bear in mind that with air removed the piston drifts freely - a pilot check valve or rod lock is the answer where a load must stay put.
| Model | AirTAC MA25X600SCA Mini Cylinder Bore 25 600 mm Stroke |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
With about 12 kg of vertical lift at a 2:1 margin, the long stroke raises small warp beams or dosing hoppers through a full 600 mm lift in a weaving or batching station.
Planning on a 147 N working push at 0.5 MPa, the cylinder swings or slides transfer gates across conveyor lanes, diverting cartons at stroke ends without hard impact thanks to the bumper pads.
The CA pivot eye mounts the cylinder directly to the machine frame, opening a 600 mm reach access guard through a linkage; a CMSG switch on the built-in magnet confirms the guard is closed.
Compare power bands before ordering: a bore 20 MA reaches about 157 N push at 0.5 MPa, a bore 32 jumps to 402.2 N, so this 25 mm unit at 245.3 N sits mid-range for sliding fixtures and gate drives. Because 600 mm exceeds the 500 mm standard stroke limit of this bore, the barrel is produced to order - state the exact length on your enquiry. Long strokes magnify rod bending, so guide the load externally and keep side thrust off the 10 mm hard-chrome rod. Mount through the CA pivot eye, or add FA flange, LB foot or SDB pivot hardware as the frame demands. The magnet is standard on every MA, so position sensing with CMSG / DMSG / EMSG switches needs no special-order piston. If the valve centres under load, expect the rod to settle - fit a pilot check valve to hold it.
Quick checklist
At 0.5 MPa this bore 25 cylinder pushes 245.3 N and pulls 206.1 N; at 0.7 MPa the figures rise to 343.4 N push and 288.5 N pull. Theoretical maximum output at 1.0 MPa is 50 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with speeds of 30-800 mm/s.
Standard MA25 strokes stop at 500 mm, so the 600 mm barrel here is a made-to-order item - confirm exact stroke and rod details from the datasheet before ordering. The build keeps the same stainless riveted body, M10x1.25 male rod thread, fixed bumper pads and built-in magnet as the standard range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.