The AirTAC AirTAC MA32X60SU Mini Cylinder - 32 mm Bore U Cover is a genuine double acting standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
A 32 mm bore round-body mini cylinder with a 60 mm stroke and a U flat-end back cover, the MA32X60SU pushes with 402.2 N and pulls with 345.6 N at 0.5 MPa (22-145 psi range) - enough muscle for clamping and short-stroke press tasks on compact machines. Air drives the rod in both directions, and fixed anti-impact pads soften each stroke end without any adjustment. The riveted stainless barrel shrugs off mild corrosion and washdown, a real edge over painted-steel minis in damp or food-adjacent spots, while the hard-chrome plated 12 mm rod resists wear through millions of cycles. For sizing, keep real work near 241 N at 0.5 MPa, which means it lifts about 20 kg vertically with a 2:1 margin. A magnet comes built in as standard, so CMSG, DMSG or EMSG switches clip on without ordering a special piston.
| Model | AirTAC MA32X60SU Mini Cylinder - 32 mm Bore U Cover |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
A 60 mm stroke presses small bearings into washing-machine pump housings; 402 N at 0.5 MPa covers light interference fits at bench speed.
Holds aluminium brackets against a drill jig with roughly 241 N of practical clamp force, cycling 30-800 mm/s between parts.
Deflects cartons off a conveyor with a flat-end mount; the stainless barrel tolerates the damp washdown zone around food-grade conveyors.
Step down to a 25 mm bore (245.3 N push at 0.5 MPa) for lighter fixtures, or up to a 40 mm bore (628.3 N) when the job needs double the thrust. Note that this cylinder drifts freely once air is removed - add a rod lock or pilot check valve if the load must stay put between cycles. The U flat-end cover accepts fixed mounting directly; FA flange, LB foot or SDB pivot brackets and I/Y rod knuckles bolt on when the frame needs them.
Quick checklist
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563.0 N and 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Running pressure spans 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), speed range is 30-800 mm/s, and the 1/8 port feeds air to a 12 mm hard-chrome rod over a 60 mm stroke.
The U version gives a fixed, flat mounting face that bolts straight to a machine plate with no pivot bracket, keeping the riveted round body close to the frame. The 32 mm bore shares the same stainless barrel construction and standard built-in magnet as every MA model, so position sensing via CMSG, DMSG or EMSG switches needs no extra-order piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.