Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø25mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA
Reach grows to 95 mm on the same 25 mm bore, keeping force at 245 N push and 206 N pull at 0.5 MPa - 343 N if you feed 0.7 MPa. The barrel is rolled onto the aluminium covers for a smooth stainless round body that wipes clean in food and packaging areas, and the hard-chrome carbon-steel rod resists scoring. The CA pivot cover accepts a swinging mount with no extra bracket.
Practical sizing: count on about 147 N of usable output at 0.5 MPa, or roughly 12 kg of vertical lift with a 2:1 margin. A built-in magnet is standard equipment, ready for CMSG, DMSG or EMSG reed switches on the barrel.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA Is Used
Pallet strapper buckle press
Presses strap ends into the buckling station of a strapping head; 245 N at 0.5 MPa seats the buckle and the 95 mm stroke clears the strap channel.
Pick-to-light bin pusher
Nudges totes off a picking shelf into a take-away lane; CMSG sensing confirms full extension before the next pick is released.
Cabinet hinge crimping jig
Crimps hinge leaf tabs in a small furniture shop jig; the CA pivot swings with the toggle linkage through every cycle.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA the Right Cylinder?
Sizing check: the next bore down (20 mm) offers 157 N at 0.5 MPa while the next up (32 mm) reaches 402 N, so 245 N from this 25 mm barrel is the middle option. The 95 mm stroke stays inside the 500 mm standard limit, but guard the rod against side thrust over that reach - external guides protect the chrome surface and seals. Mount through the CA pivot cover for linkages, or bolt an LB foot / FA flange for fixed frames. A rod lock is the answer if the load must hold with air off.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA FAQ
The 25 mm bore delivers 245 N push and 206 N pull at 0.5 MPa; at 0.7 MPa it makes 343 N push and 289 N pull. Maximum theoretical output is 50 kgf at 1.0 MPa. Ports are 1/8".
The riveted stainless tube with a hard-chrome plated rod resists rust in washdown, outdoor and food areas, where painted mini cylinders chip and corrode. The covers stay aluminium alloy to keep weight low.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC25X95SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.