Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH
This CA-pivot 10 mm stroke cylinder carries the standard MAC build: a riveted stainless tube with a 20 um hard-chrome rod, so there is no paint to chip in wet, outdoor or food-line corners. Air works the rod in both directions and the variable cushions at each end can be tuned from a gentle touchdown to a firm stop. The bore develops 402 N of push at 0.5 MPa - treat about 241 N of that as dependable working force once friction and wear are counted.
Supply 0.15-1.0 MPa (22-145 psi), travel 30-800 mm/s, and rely on the standard magnet for CMSG, DMSG or EMSG switching without ordering a special piston. The trailing H in the model code is not part of the standard MAC ordering chart, so confirm its exact meaning from the datasheet before you order.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH Is Used
Reject finger on a lab bottling line
Flicks out-of-tolerance vials from a conveying lane; the stainless barrel stands up to repeated wipe-downs between batches.
Eject pin on a small injection mould
A 10 mm kick clears a finished cap from the cavity, and the cushion softens contact with the mould face at cycle end.
Bin divider at a picking station
Snaps a divider across a tote lane between picks, with the pivot mount letting the body track a slightly angled guide.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH the Right Cylinder?
Weigh it against neighbours: bore 25 reaches 245 N and bore 40 reaches 628 N at 0.5 MPa, so the 32 mm fits when a 10 mm probe, kicker or clamp needs more than the small bore but less than a 40 mm body. Once supply stops there is no brake on the piston - it coasts with the load - so add a rod lock or pilot check valve wherever a held position matters. The pivot eye on the CA back cover accepts a pin so the body can follow link motion, and SDB or LB brackets adapt it to fixed frames.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH FAQ
Double-acting: 402 N push and 346 N pull at 0.5 MPa, rising to 563 N push and 484 N pull at 0.7 MPa, with a theoretical 82 kgf maximum at 1.0 MPa. Pressure range 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, cushioning variable at both ends.
Yes - even short strokes in damp or wash-prone corners benefit from a barrel that will not rust and a rod that will not gall. Back the cushion needle screws fully open before first run, then close them gradually until the touchdown is quiet but not sluggish.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCAH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.