Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM
AirTAC rounds out the 32 mm MAC family with this CM round-end cover version: a 10 mm double-acting stroke whose cushions at both ends are needle-adjustable, so you set exactly how hard the piston lands. Stainless tube with a chrome-plated rod stands up to humid, wash-prone corners that rust painted minis in months. At 0.5 MPa the bore pushes 402 N; halve the 41 kg theoretical lift and you still raise about 20 kg vertically - headroom enough for a gripped part plus fixture friction.
The round-end CM cover suits a simple pinned link without added hardware, and FA flange, LB foot or SDB mounts bolt on when the machine needs them. The built-in magnet pairs with CMSG, DMSG and EMSG switches as standard equipment. Specify PT (blank), G or NPT ports - here 1/8 inch - and run 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM Is Used
Stopper blade on a roller conveyor
Pops up to hold a tote between robot picks; the cushioned landing keeps the blade from rattling the frame at cycle end.
Lid latch on a mixer guard
A 10 mm stroke seats the guard latch near washdown; the stainless body and chrome rod shrug off daily hose-downs.
Kicker on an electronics tray diverter
Nudges component trays onto the alternate lane, with 402 N at 0.5 MPa moving loaded trays without a shove that scatters parts.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM the Right Cylinder?
In the 10 mm class, bore 25 manages 245 N and bore 40 manages 628 N at 0.5 MPa; choose this 32 mm when a latch, stopper or kicker sits between those levels. An air-off piston will sag under its load - the cylinder carries no latch - so a rod lock or pilot check valve is the answer whenever a stopped position must persist. If the round-end cover does not match your bracket, the CA pivot or U flat-end cover in the same bore and stroke swaps in directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM FAQ
It delivers 402 N extending and 346 N retracting at 0.5 MPa, 563 N and 484 N at 0.7 MPa, and up to 82 kgf theoretical at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi), tolerates 1.5 MPa (215 psi) proof, and cycles at 30-800 mm/s between -20 and +70 C.
No. Every MAC cylinder ships with the piston magnet already installed, so CMSG, DMSG and EMSG switches mount on the barrel and read position immediately - no special-order piston, no retrofit kit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.