Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM
A 32 mm bore in a stainless round barrel is what the MAC32X110SCM offers, with 110 mm of stroke and a CM round-end back cover for straightforward fixed mounting. Double acting throughout - air pushes the rod out and pulls it back - with a variable air cushion at each end so faster strokes or heavier loads do not slam the covers. The numbers: 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and about 241 N of practical working force at 0.5 MPa once you build in margin.
Two construction details earn their keep here. The piston carries a heterogeneous two-way seal that also retains grease inside the cylinder, stretching the interval between relubrication. And the rolled stainless tube with its 20 um hard-chrome rod resists the damp that corrodes painted minis, so it suits washdown corners and outdoor frames. The magnet comes standard for CMSG, DMSG or EMSG switch mounting.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM Is Used
Core-pin insertion
Seating a core pin into a small injection mold on a side action: 563 N at 0.7 MPa overcomes melt back-pressure, and the grease-retaining piston seal suits long mold cycles.
Bench lancing punch
Punching a slot in steel shim on a light bench press: 402 N at 0.5 MPa shears thin stock, with cushions damping the breakthrough at bottom of stroke.
Palletiser infeed stopper
Raising a stopper gate that halts totes at a palletiser infeed: the round-end cover bolts flat to the frame, and sensors on the standard magnet confirm gate position.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM the Right Cylinder?
Set the 32 mm bore against its neighbours: 245 N push at 0.5 MPa for a 25 mm bore, 628 N for a 40 mm bore - the 402 N of this size covers mid-weight pushing, clamping and insertion work. Do not rely on the cylinder to hold a station: cut the air or centre the valve and the piston creeps, so specify a rod lock or pilot check valve where load-holding matters. The CM round end fixes directly at the rear; FA flange, LB foot and SDB pivot brackets cover other frames, and ports are 1/8" on a 12 mm rod threaded M10x1.25.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM FAQ
Push 402.2 N, pull 345.6 N at 0.5 MPa; push 563 N, pull 484 N at 0.7 MPa; theoretical maximum 82 kgf at 1.0 MPa. Run it on 0.15-1.0 MPa (22-145 psi) of 40 um filtered air at 30-800 mm/s.
Air connections are 1/8" (fixed by the 32 mm bore), and the 12 mm carbon-steel rod is hard-chrome plated to 20 um with an M10x1.25 male external thread. The stainless barrel is rolled onto the aluminium covers, so there are no tie rods to retighten.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.