Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU
Need a long-travel pusher that bolts flat to a plate? The MAC32X110SU gives 110 mm of stroke and 402.2 N of push at 0.5 MPa in a stainless round body, with the U flat-end back cover ready for direct face mounting. It is double acting, cushioned at both ends, and runs on 0.15-1.0 MPa (22-145 psi) air at 30-800 mm/s.
The 12 mm hard-chrome rod slides in a riveted stainless barrel, a combination that survives humid workshops and periodic washdown without peeling paint or leaving rust streaks. Vertical lifts work out to about 41 kg at the full 0.5 MPa rating; spec around 20 kg to keep a 2:1 margin. A magnet is factory-fitted, so CMSG, DMSG or EMSG switches bolt to the barrel for position signals.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU Is Used
Pallet lane stop
Mounted flat to the frame, the rod lifts a 15 kg stop blade that holds totes in a staging lane and drops flush to release them.
Bench press assist
402.2 N of push seats bearings onto shafts at a maintenance bench, with the cushion removing the final slam at bottom of stroke.
Fixture part present
Extends 110 mm to confirm a casting sits home in its CNC fixture before the control allows the machining cycle to start.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU the Right Cylinder?
Bore choice in brief: 245.3 N from a 25 mm unit suits light gates, 402.2 N from this 32 mm covers medium loads, and 628.3 N from a 40 mm bore takes the heavier duty. Because an unpowered MAC rod simply drifts, add a pilot check valve or rod lock whenever the load must stay put between signals. The flat-end U cover suits bracket or surface mounting; add FA flange, LB foot or SDB pivot hardware if the frame demands it, and support long side-loaded strokes with external guides.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU FAQ
At 0.5 MPa the cylinder pushes 402.2 N and pulls 345.6 N; at 0.7 MPa push rises to 563.0 N; theoretical peak force is 82 kgf at 1.0 MPa. Port size is 1/8 inch and the rod thread is M10x1.25.
The rolled stainless tube and hard-chrome plated carbon-steel rod resist corrosion and paint flaking that plague painted-steel minis, keeping the 32 mm bore sealed and smooth through repeated wet cleaning cycles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X110SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.