Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 170mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke170 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM
A 32 mm bore in the MAC round-body series gives you 402.2 N of push at 0.5 MPa, and this 170 mm stroke version adds a CM round-end back cover for compact fixed mounting. Air drives the rod both ways and a variable air cushion at each end soaks up stop shock.
At 0.5 MPa you can count on roughly 241 N of usable push once you keep a 40 percent reserve, which equates to lifting about 20 kg vertically with a 2:1 margin. The stainless barrel and hard-chrome plated rod shrug off washdown and damp air, and the standard built-in magnet accepts CMSG, DMSG and EMSG switches without special ordering.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM Is Used
Bushing press-fit station
A 170 mm stroke lets the 32 mm bore reach into a housing bore and seat bushings with about 241 N of controlled push at 0.5 MPa.
Indexing stop on a rotary table
Cushioned engagement stops the index plate firmly; 402 N of push locks the plate against the detent at 0.5 MPa without hammering the cover.
Sample lift near a lab autoclave
Stainless barrel and chrome rod stand up to steam-adjacent humidity while raising about 20 kg trays vertically with a 2:1 margin.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM the Right Cylinder?
If 402.2 N at 0.5 MPa is more than the job needs, the 25 mm bore delivers 245.3 N; step up to a 40 mm bore when 628.3 N is required. Ports are 1/8" on all 32 mm bodies with an M10x1.25 male rod thread. Remember a plain MAC drifts when air is removed - fit a rod lock or pilot check valve if the load must stay put. FA flange, LB foot or SDB pivot brackets bolt on alongside the CM back cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa push rises to 563.0 N and pull to 483.8 N. The theoretical maximum for the 32 mm bore is 82 kgf at 1.0 MPa.
Every unit ships with a standard magnet, so CMSG, DMSG and EMSG switches clip straight onto the barrel. Air ports are 1/8" on all 32 mm bores, with PT threads standard and G or NPT selectable.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X170SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.